Barco 26-0313000-00 Bedienungsanleitung

rëÉêÛë=dìáÇÉ b å Å ç êÉ = m êÉë É å í~ í á ç å = p ó ëíÉ ã • Manual # 26-0313 000-00 • Revision 04[...]

2 Encore Prese ntation System • User ’s Guide • Rev 04 båÅçêÉ=mêÉëÉåí~íáçå=póëíÉã= √ =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. February 5, 2010 All rights reserved. No pa rt of this docume nt may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retr ieval s[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 3 agreed upon in the contract, al l guarantee claims of the purchaser will be rendered inva lid. Not included in the guarantee coverage are system failures which are attributed to programs or special electronic circuitry prov id ed by the purchaser , e.g. inte rfa ces. Normal wear as well [...]

4 Encore Prese ntation System • User ’s Guide • Rev 04 léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tio n in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. T o avoid p[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 5 qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel. `^rqflk The exclamation point within an equilateral t[...]

6 Encore Prese ntation System • User ’s Guide • Rev 04 `Ü~åÖÉ=eáëíçêó The table below lists the changes to the Encore Presentation System User ’s Guide. T able 0-1. Change History Rev Date ECP # Description Approved By A 12/10/04 1360 Released R. Pellicano B 10/24/06 1704 Updated features and menus R. Pellicano 03 1/22/10 575245 U[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 7 q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NT Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Chapter Structure . [...]

8 Encore Prese ntation System • User ’s Guide • Rev 04 Table of Contents M/E Input Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Program Output Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Analog Input Flexibility . . . . . . . . . . . . .[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 9 Table of Contents Destination Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Source Selection Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Layer Control Section . . . . . . . . . . . . . . . . . . . . . . . . .[...]

10 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Rotary Encoder Menu . . . . . . . . . . . . . . . . . . . . . . 179 TBar & Joystick Menu . . . . . . . . . . . . . . . . . . . . . . 180 Key Detect Menu . . . . . . . . . . . . . . . . . . . . . . . . . 181 Destination Setup Menu . . . . . . . . . . . . . . . . . . .[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 1 1 Table of Contents Crop Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 Source Adjustment Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 Source Adjustment Menu Trees . . . . . . . . . . .[...]

12 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Aux Destination Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Aux Destination Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 ImagePRO or PrePRO-II Aux Dest ination Setup . . . . . . . . . . . . . . . . 2[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 13 Table of Contents Understanding Split and Mix Modes . . . . . . . . . . . . . . . . . . . . . . . . . 321 Split Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321 Mix Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 321[...]

14 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents Storing User Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Applying User Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 User Key Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 15 Table of Contents Via Web Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 387 Serial Upgrade Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 Ethernet Upgrade Method . . . . . . . . . . . . . . . . . .[...]

16 Encore Presentation System • User ’s Guide • Rev 04 Table of Contents[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 17 N K==fåíê çÇìÅíáçå This chapter is designe d to introduce you to t he Encore Presentation System. Areas to be covered are: • Software V ersion • Chapter Structure • How to Use This G uide • Conventions • T erms and Definitions • System Overview • New Feat ure Re[...]

18 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå Software Version pçÑíï~êÉ=sÉêëáçå This version of the Encore User ’s Guide is based on softw are versio n 1.24 . All new features in this version (and all pr evious versions) are listed in the “ New Feature Review ” section on page 35. `Ü~é?[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 19 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are tips for streamlining your use of th is User ’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired location. All[...]

20 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå Conventi ons `çåîÉåíáçåë= The following conventions are used througho ut this guide: • The symbol  denotes an operations procedure. • The symbol S denotes an example . • Entries written in bold-face letters denot e physical Controller buttons[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 21 NK==fåíêçÇìÅíáçå Terms and Definiti ons ~ When discussing Encore operations, the term “ mixer ” will be used — specifically because the term “mixer” is silk-screened on the panel. Figure 1-1. Mixer Label in the Layer Control Sectio n • “ Operator ” refers to t[...]

22 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview póëíÉã=lîÉêîáÉï The following topics are discu ssed in this section: • Advanced Video Processing • Encore Features • The Encore Video Proces sor • A Word About Layers • A Word About Destinations • Effect Combinations • [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 23 NK==fåíêçÇìÅíáçå System Overview båÅçêÉ=cÉ~íìêÉë Following is a detailed list of Encore features: • Up to 12 independent windows or 6 wind ows with se amless transitions. • T wo native high resolution background channels provide background vide o underneath PIP[...]

24 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview qÜÉ=båÅçêÉ=sáÇÉç=mêçÅÉëëçê The Encore Video Processor is a compact cha ssis that provides the Enco re Presentation System’s input and output circui try . T wo models are available: • The “standard” Video Processor ( VP[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 25 NK==fåíêçÇìÅíáçå System Overview • 2048 x 1080p Digital Cinema video • Plasma display resolutions The figure below illustra tes a bl ock diagra m of the VPx’s M/E. Figure 1-3. M/E Board Block Diagram, VPx The VPx accepts the following inputs: • Computer input resoluti[...]

26 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview ^=tçêÇ=^Äçìí=i~óÉêë Within the Encore system, each mixer has two layers, A and B , and each can be assigned to either PIP or Key functionality . A typical single mixer appli cation (including the DSK) is illustrated below . Figure 1-4[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 27 NK==fåíêçÇìÅíáçå System Overview • Between mixers, the hierarchy of priorities is easy: Figure 1-5. Mixer Priority ~ The Backgrou nd layer is always at the bottom. ~ All effects on Mixer 1 are visually in front of the background. ~ All effects on Mixer 2 are in front of Mix[...]

28 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview bÑÑÉÅí=`çãÄáå~íáçåë A fully-loaded Encore VP or VPx is a unit with three mixer (M/E ) boards. A unit configu red in this way can scale six input sources to create PIPs and/o r Keys. These in turn can be sized and positioned on the[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 29 NK==fåíêçÇìÅíáçå System Overview • Single Mixer Effect 2 This transi tion is similar t o effect 1, but because the DSK is not i n use, the background can t ransition from source A t o B, and the PI P can transition b etween layers A and B. Figure 1-7. Single Mixer Effect 2 [...]

30 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview • Single Mixer Effect 5 In this effect, because the DSK is in use, th e background canno t transition — you can use either A or B. Here, you can independently fade two scaled PIPs up and down — with or without t he DSK on scre en. Figure 1[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 31 NK==fåíêçÇìÅíáçå System Overview • Dual Mixer Effect 2 With this dual Mixer effect, you can tran sition background s between sources A and B, plus independe ntly size, position, cut or fade a PIP and key on each Mixer . T ransitions within the PIPs cann ot be performed. The[...]

32 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview • T riple Mixer Effect 2 This effect enables you to transition be tween background s sour ce s, plus independently size, posi tion, cut or fade a PIP and key on each of the three Mixers. T ransitions within the PIPs or tran sit ions between ke[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 33 NK==fåíêçÇìÅíáçå System Overview • The range of external devices that can be controlled is greatly increased, permitting users to automate ent ire shows. The Events Manager software also supports the management of digital media sources. `çåÑáÖìê~íáçå=^ééäáÅ~[...]

34 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå System Overview mêçÇìÅí=aáÑÑÉêÉåíá~íáçå The table below illustrates the differences between the small (SC) and large (LC) Encore controllers. T able 1-1. Product differentiation between SC and LC controllers Feature Small Con troll er (SC) La[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 35 NK==fåíêçÇìÅíáçå New Feature Re view kÉï=cÉ~íìêÉ=oÉîáÉï This section lists the new features that have been impl emented in recent versions of Encore software. Reference links are provided. • Software V ersion 1.24 Features • Software V ersion 1.22 Features •[...]

36 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review pçÑíï~êÉ=sÉêëáçå=NKOO=cÉ~íìêÉë The following feat ures were impl emented in software version 1.22. • V ertical Blending V ertical Arra y blending is supported, and all cablin g to the VP and VPx is the same as a standard w[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 37 NK==fåíêçÇìÅíáçå New Feature Re view • Enhanced Source Preview The Source Preview function has been en han ced. After the button has been pushed for the first time, the ne xt press sizes the PIP t o 1:1, with respect t o the source’s input resolution. In Chapter 7, refer [...]

38 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review • Support for Lantro nix UDS2100 Support is provided for the Lantroni x UDS2100 , a serial -to-Ethernet device th at replaces the UDS200 — which Lant ronix is pha sing out. Both models will continue to b e supported by Encore. In Chapter [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 39 NK==fåíêçÇìÅíáçå New Feature Re view standard Aux (monitors), ImagePRO Aux and PresentationPRO-II Aux . Refer to Appendix D, “ Working With Destinatio ns ” on page 393 for details. • Support for VP or VPx I Ds 17 - 32 Using the Miscella neous Menu , you can re-define VP[...]

40 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review • Support for Analog Backg ro unds Using the Backgrou nd Input Setup Menu , you can choose between Analog, DVI Matte and “frame grab” backgrounds. In Chapter 5, refer to th e “ Backgroun d Input Setup Menu ” section on page 237 for [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 41 NK==fåíêçÇìÅíáçå New Feature Re view • Programmable Controller Lockout Y ou can lock the Contro ller , t hus preventing key presses from cha nging the system. While locked, serial commands can still be sent via t he Console Port. T o unlock the Controller , a lockout code i[...]

42 Encore Presentation System • User ’s Guide • Rev 04 NK==fåíêçÇìÅíáçå New Feature Review[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 43 O K = = e ~ êÇï~ êÉ = l êá Éå í ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides detailed information about Encore’s hardware, including the Video Processor , VPx , and the Controller (rear panel only). The following topics are di scussed: • Video Processors ?[...]

44 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors sáÇÉç=mêçÅÉëëçêë The following topics are di scussed in this sectio n: • Video Processor Front Panel • VPx Front Panel • Video Processor Rear Panel • VPx Rear Panel • A Word About M/E Connector Priority • M/E Connectors (VP[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 45 2. Hardware Orientation Video Processors smñ=cêçåí=m~åÉä The VPx front panel is identica l to the “standard” VP front panel, with the exception of th e VPx product label, as shown below: Figure 2-2. VPx label sáÇÉç=mêçÅÉëëçê=oÉ~ê=m~åÉä The figure below ill u[...]

46 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors 1) Preview Out DVI One DVI connect or is provided for Digital Preview Output . In Appendix A, refe r to the “ DVI Connector Pinout s ” section on page 369 for pinouts. 2) Preview Out Analog One 15-pin D conne ctor is provided for Analog Preview[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 47 2. Hardware Orientation Video Processors 10) Ethernet Port One RJ-45 connector is provided for 10/100 BaseT Ethernet communication s. For multiple connections, use an Eth ernet switch on an isolated network. 1 1) Genl ock One BNC connector is provid ed for an analog Genlock connecti on.[...]

48 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors smñ=oÉ~ê=m~åÉä The figure below illustra tes the VPx rear panel: Figure 2-4. VPx Rear Panel Please note: • Connectors 1 throu gh 10 are part of the VPx’s output board, and all output connections are standard. • All program and preview D[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 49 2. Hardware Orientation Video Processors 3) Program 2 Out Analog One 15-pin D connector is provided fo r t he Analog Program 2 Output . This output is identical to the analog Program 1 Output , e xcept that it do es not include edge feathering and da ta doubling components. In Appendix [...]

50 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors 10) Ethernet Port One RJ-45 connector is provided for 10/100 BaseT Ethernet communication s. For multiple connections, use an Eth ernet switch on an isolated network. Six analog and digital connectors are provided for each M/ E. Please note: ~ All [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 51 2. Hardware Orientation Video Processors With this in mind, the informat ion below lists how the physical connecto rs rela te to the various mixers on different VP and VPx configurations. Keep this correlation in mind when you are making rear-panel connections. • In a 3 M/E system: ~ [...]

52 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors jLb=`çååÉÅíçêë=EsmF The figure below ill ustra tes a close-up of t he M/E con nectors on the VP . Even though th e figure uses M/E 1’s board, all M/E connections a re identical. Figure 2-5. M/E Connectors, VP On each M/E, th ree input co[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 53 2. Hardware Orientation Video Processors An M/E’s Source Link Output must always be connected to its associated M/E Source Link Input on the next chassis, and never cross-routed. S Connect M/E 2’s Source Link Output on Processor 1 to M/E 2’s Source Link Input on Processor 2. Pleas[...]

54 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Video Processors jLb=`çååÉÅíçêë=EsmñF The figure below ill ustrates a close-up of t he M/E connectors on th e VPx. Even though the figure uses M/E 1’s board, all M/E connection s are identical o n the VPx. Figure 2-6. M/E Connectors, VPx On each M/E, on[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 55 2. Hardware Orientation Video Processors b) Source Link Out One DVI connector is provided for the M/E’s Source Link Outp ut . For wide screen and multi-screen app licat ions, this connecto r loops your inputs to the next VP or VPx in the chain. Because all anal og and digital inputs r[...]

56 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation M/E Input Notes jLb=fåéìí=kçíÉë Please note the following important poi nts regarding M/E inputs: • Single Processor Configura t io ns (VP and VPx) — Inputs are co nnected to the VP in the normal manner . Y ou can connect a total of six inputs to each M[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 57 2. Hardware Orientation Program Ou tput Notes mêçÖê~ã=lìíéìí=kçíÉë For both VP and VPx units, please note the following important points regarding the Processor ’s program outputs: • HD/SDI Output s — For the HD/SDI output, you ca n set the output to be SDI (SMPTE 25[...]

58 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Controller Rear Panels `çåíêçääÉê=oÉ~ê=m~åÉäë The figure below ill ustra tes the rear pa nel connectors on both Controll ers ( SC and LC ). The panels are identical on bot h models. Figure 2-7. Controller Rear Panel Connectors Following are descript [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 59 2. Hardware Orientation Controller Rear Panels 3) MultiMedia Card Slot One MultiMedia Card Slot is provided for a Flash Memory Card connection t o the Controller . The flash card enables you to store and recall system configuration s, and transfer them between Cont rollers as required. [...]

60 Encore Presentation System • User ’s Guide • Rev 04 2. Hardware Orientation Controller Rear Panels[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 61 P K = = e ~ êÇï~ êÉ = f å ë í~ ä ä ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides comprehensive installati on inst ructions for the Encore system’s hardware. The f ollowing topics are d iscussed: • Safety Precautions • Unpacking and Inspection • Site Prep[...]

62 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all Encore Presentation Syst em installation procedures, observe the following important safety and handling rules to avoid dama ge to yourself and the equipment: • T o protect users from electric shock, en[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 63 3. Hardware Installation Cable and Adapter Info rmation `~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå The table below provides cable and ada pter informati on: * Cable and adapter quanti ties depend on the number of M/Es purchased in each VP or VPx. T able 3-1. Encore Presentation Sy[...]

64 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation fåëí~ää~íáçå Detailed installation procedures are provided fo r th e Encore configurations list ed below . Select the desired configuratio n, and follow all procedures as list ed: • Single Screen Configur ation • T riple Screen Con figura[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 65 3. Hardware Installation Installation páåÖäÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a single screen En core configuration. Use this diagram for reference in the followin g procedu re. Please note: • Aux destinations are not sh own in[...]

66 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 2. In Appendix A, refer to the “ Physical and Electrical Specifications ” section on page 367 for electrical and mechani cal details. 3. In Chapter 2, refer to the “ Video Processor Rear Panel ” sectio n on page 45 and the “ Controller Rear [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 67 3. Hardware Installation Installation d. Ensure that all source s are properly connected to your router(s). e. Connect all sele cted router o utputs to the desired M/E inputs. 9. ScreenPRO-II Connections — if your system includes one (o r more) destination ScreenPRO-II units, you can [...]

68 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation qêáéäÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a triple screen Encore con figuration. This diagram can be used as reference in th e procedure. Please note: • Aux destinations are not sh own in the d[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 69 3. Hardware Installation Installation  Use the following steps to install a triple screen Encore confi gurat ion: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62. 2. In Appendix A, refer to the “ Physical and Electrical[...]

70 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation c. T o connect two (or more) serial routers, a third-party Ethernet-to-Serial converter is required, such as the Lan tronix model UDS1 00 , UDS200 or UDS2100 ( http://www .lantronix.com ). Each UDS2100 ca n control two serial routers. • Using RS-232[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 71 3. Hardware Installation Installation 14. System ID — Using the Unit ID Selector , set th e ID of VP #1 to 1 , VP #2 to 2 , VP #3 to 3 . Each Processor must have a unique ID. 15. Power On — a ll power on instru ctions are covered in Chapter 6. With all connections ma de, continue wi[...]

72 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå The figure below illustrates a block diagram of a “triple” wi de screen configuration. Use this diagram for reference in the followi ng procedure. Please note: • Aux destinations are not sh own in the[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 73 3. Hardware Installation Installation  Use the following steps to install a wide screen Encore conf iguration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62. 2. In Appendix A, refer to the “ Physical and Electrical Sp[...]

74 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation • Connect the compute r ’s “head 3” to processor 3, input 3A d. The DSK so urce may originate from a co mputer with a multi-head graphics card, but it is not a requiremen t. S Connecting a single-head graphics card to processor 3 only would en[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 75 3. Hardware Installation Installation d. Ensure that all source s are connected to your router(s). e. Connect all selected route r outputs to the desired M/E inputs on VP 1. 9. ScreenPRO-II Connections — if your system includes one (o r more) destination ScreenPRO-II units, you can co[...]

76 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=`çåÑáÖìê~íáçå=mäìë=táÇÉ=pÅêÉÉå=mêÉîáÉï The figure belo w illustrates a “triple ” wide screen conf iguration that incl udes a fourth VP o r VPx, which is used to create a combined wid e scre en progra[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 77 3. Hardware Installation Installation Please note the following poi nts regarding this configuration: • Processor #4 receives DVI Program and Preview feeds from processors #1, #2 and #3. • Using Processor #4, three PIPs are scaled and positioned to create the wi de screen Program di[...]

78 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 4. Source Connections — connect DVI outputs from processors one, two and three to processor #4’s scaler inputs: ~ Connect processor #1 DVI Program 2 output to processor #4 input 1A . ~ Connect processor #1 DVI Preview 2 output to proce ssor #4 inp[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 79 3. Hardware Installation Installation 4. Select the destinati on that you assigne d to processor #4. 5. Scale and align t hree PIPs for the “Preview” po rtion of the d isplay , and thre e PIPs for the “Program” port ion, as illustrate d in Figure 3-5 on page 77.  Single-butto[...]

80 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation páåÖäÉ=pÅêÉÉå=pí~Åâ=`çåÑáÖìê~íáçå “ St acking ” is a configurati on met hod that provides access to six mixers, with th e ability to display up to 12 PIPs on screen simultaneously . Please note : • Video Processors (VP) m[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 81 3. Hardware Installation Installation For this procedure, you will need:  Use the following steps to install a single screen “stack” configu ration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62. 2. In Appendix A, r[...]

82 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation b. Using the info rma tion from the chart: • Connect “direct” sources 1 - 6 to each M/E’s input connectors on the “ bo ttom stack ” processor . • Connect “direct” sources 7 - 12 to each M/E’s input connectors on the “ top stack ?[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 83 3. Hardware Installation Installation 10. ScreenPRO-II Connections — if your system includes one (or more) dest ination ScreenPRO-II units, you ca n configure the u nits for internal or external routing: a. When External rout ers are used, connect tw o outputs from an Anal og router t[...]

84 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation táÇÉ=pÅêÉÉå=pí~Åâ=`çåÑáÖìê~íáçå The figure below illustra tes a block diagram of a wide screen “stack” configuration. Aux destinations are not shown . Use this diagram for refere nce in the following procedure . Figure 3-8. B[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 85 3. Hardware Installation Installation  Use the following steps to install a wide screen “stack” configuration: 1. Follow the u np acking proced ure s as l ist ed in the “ Unp acking and Inspection ” section on page 62. 2. In Appendix A, refer to the “ Physical and Electrica[...]

86 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation • On stack #1 only , conne ct “direct” sources 1 - 6 to each M/E’s input connectors on the “ bo tto m stack ” processor . • On stack #1 only , conne ct “direct” sources 7 - 12 to each M/E’s input connectors on the “ to p stack ?[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 87 3. Hardware Installation Installation b. On the second stack: • Connect the bottom stack’ s DVI Preview Output to the to p stack’s Background 1 input ( 3A ). • Connect the bottom stack’ s DVI Program Output to th e top stack’s Background 2 input ( 3B ). 8. D/A Connections ?[...]

88 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Installation 1 1. Output Connection s — all output monito r and projector connection s originate from the “ top st ack ” processors: a. On each “top stack” processor , connect the analog or d igital Preview Output to the input of the associated Preview M[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 89 3. Hardware Installation Connection Charts `çååÉÅíáçå=`Ü~êíë= A series of Connection Cha rt s are provided on the follo wing pages to assist with your input connections. The foll owin g topics are discussed: • Connection Overview • Chart Instructions • Sample Connecti[...]

90 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts `Ü~êí=fåëíêìÅíáçåë Following are in structions for using the connection charts: • Router I/O Chart s Complete one chart for each video router in your system (up to the maximum 8). ~ Column 1: list the sources that are connected to[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 91 3. Hardware Installation Connection Charts p~ãéäÉ=`çååÉÅíáçå=`Ü~êíë Following are sample connection charts for an Encore system comprised of 1 x analog router , 2 x direct inpu ts, and 6 x destinations. T able 3-8. Router I/O Chart #1 (sample) Router #1 Router T ype: x [...]

92 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts _ä~åâ=`çååÉÅíáçå=`Ü~êíë= The following blank conne ction charts are provided: • Router I/O Chart s • Direct En core Input Cha rt • Encore Destination Cha rt oçìíÉê=fLl=`Ü~êíë= Complete one chart for each vi deo rout[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 93 3. Hardware Installation Connection Charts T able 3-12. Router I/O Chart #2 Router #2 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-13. Router I/O Chart #3 Router #3 Router T ype: Analog Digital DVI Source Route[...]

94 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts T able 3-14. Router I/O Chart #4 Router #4 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-15. Router I/O Chart #5 Router #5 Router T ype: Analog Digital DVI Source Router [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 95 3. Hardware Installation Connection Charts T able 3-16. Router I/O Chart #6 Router #6 Router T ype: Analog Digital DVI Source Router Input/Outp ut De stination 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 T able 3-17. Router I/O Chart #7 Router #7 Router T ype: Analog Digital DVI Source Route[...]

96 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Connection Charts aáêÉÅí=båÅçêÉ=fåéìí=`Ü~êí= Complete the following chart for any sources that will be con nected directly to Encore (such as a computer for a DVI background). T able 3-18. Router I/O Chart #8 Router #8 Router T ype: Analog Digital[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 97 3. Hardware Installation Connection Charts båÅçêÉ=aÉëíáå~íáçå=`Ü~êí= Complete the fol lowing chart for all Encore destinations. T able 3-20. Encore Destination C hart Destination Device Screen Notes Controller SC Controller LC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1[...]

98 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections mêçÖê~ã=~åÇ=pçìêÅÉ=iáåâ=`çååÉÅíáçåë The following topics are di scussed in this sectio n: • Overview of Edge-Blending T echnology • Connecting Program an d Source Links lîÉêîáÉï=çÑ=bÇÖÉJ_[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 99 3. Hardware Installation Program and Source Li nk Connections inherent resolution of the output image remains that of the source material, 1920x1080 pixels. Figure 3-10. HD Source Material Formatting • Use Of Multi-He a d Gr ap hics Boards S t andard multi-head graphics b oards can be[...]

100 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections sáÇÉç=mêçÅÉëëáåÖ The purpose of the edge-blending process is to provide a smooth transition for the eye over the blending reg ion. T o provide a smooth transition, i dentical image data from two different projector[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 101 3. Hardware Installation Program and Source Li nk Connections • Edge Feathering The overlapping image data in the bl end region must be edge-feathered t o support a seamless opti cal blend. The tr ansfer function must be prog rammable to support blend regions of different widths and [...]

102 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections `çååÉÅíáåÖ=mêçÖê~ã=~åÇ=pçìêÅÉ=iáåâë This section provides instructions for conn ecting Program Link and Source Li nk connections (DVI-I) in a variety of Encore confi gurations. • Left Justified Config[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 103 3. Hardware Installation Program and Source Li nk Connections 3. For the last processor in the cha in, do not connect the Program Link Out connector . 4. Source Link Connections (DVI-I) For processor 1, conn e ct ea ch M/E’ s So urce Link Out connector to the associated Source Li nk [...]

104 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections `ÉåíÉê=gìëíáÑáÉÇ=`çåÑáÖìê~íáçå Center justification me ans that the projected imag e is properly centered within the available number of pixels, and that unused source mate rial is removed from the fa r [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 105 3. Hardware Installation Program and Source Li nk Connections Connect: ~ Processor 1 Program Link Out > Processor 2 Program Link In ~ Processor 2 Program Link Out > Processor 3 Program Link In ~ Processor 3 Program Link Out > Processor 1 Program Link In 3. Program Link Con nec[...]

106 Encore Presentation System • User ’s Guide • Rev 04 3. Hardware Installation Program and Source Link Connections[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 107 QK==`çåíê ç ääÉê=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes each se ction of the system’s two cont rollers — the models LC and SC. The descriptions are designed t o fa miliarize you with each section, the buttons within the sections, and basic [...]

108 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller LC Front Panel `çåíêçääÉê=i`=cêçåí=m~åÉä The figure below ill ustra tes the Controller LC fro nt panel: Figure 4-1. Controller LC Front Panel Following are descri pt ions of each front panel section on th e mo del LC Controller: 1) T o[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 109 4. Controller Orientation Controlle r LC Front Pa nel 3) Alphanumeric Keyp ad The Alphanumer ic Keypad is reserved for numeric functions. This section is only available on the LC Controller. Refer to the “ Alphanumeric Keypad ” section on page 1 19 for additional details. 4) Joysti[...]

1 10 Encore Prese ntation System • User ’s Guide • Rev 04 4. Controller Orientation Controller LC Front Panel 13) T ransition Se ction The T ran sition Section incl udes the T- B a r for manually mixing sources on and off Program, plus dedicated buttons for cuts, auto-transi tions and sequencing. Refer to the “ T ransition Section ” headi[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 1 1 1 4. Controller Orientation Controlle r S C Front Panel `çåíêçääÉê=p`=cêçåí=m~åÉä The figure below illustra tes the Controller SC f r ont panel. This panel includes many of the same sections as the Controller LC — the difference is that the sections are more compact, [...]

1 12 Encore Prese ntation System • User ’s Guide • Rev 04 4. Controller Orientation Controller SC Front Panel 4) Preset Section The Preset Section ena bles you to sto re and recall Cont roller setups, called “presets.” On the Controller SC, you have access to 64 presets — 8 pages of 8 presets each. Refer to the “ Preset Sec tio n ” [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 11 3 4. Controller Orientation Use of Color rëÉ=çÑ=`çäçê Color plays an important role with each Controller ’s array of buttons: White button s are used for sou rces, destinati ons, presets and user keys. Gray buttons are used for softkeys (in the T ouch Screen section) and for k[...]

1 14 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections `çåíêçääÉê=pÉÅíáçåë This section provides detailed descrip tions of each Controller secti on. Illustrations for both Controller models are provided , an d the diff erences in functionality are clea rl y noted. The following[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 11 5 4. Controller Orientation Controller Sections qçìÅÜ=pÅêÉÉå=pÉÅíáçå The figure below ill ustra tes the T ouch Screen Sec ti on , which is identical on both Controller models. The model LC h as two T ouch Screen sections, whil e the model SC has one. A sample menu is show[...]

1 16 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections 3) T ouch Screen All menus and functions can be accesse d in a variety of ways: ~ T ouch the desired label on the T ouch Screen itself (for example, th e {BORDER} button) to access the menu. ~ Press a Sof tkey that is directly adjace nt to[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 11 7 4. Controller Orientation Controller Sections póëíÉã=hÉóé~Ç The figure below ill ustra tes the System Keypad , which provides direct access to system configuration and se tup menus. The keypads for the models LC and SC are slightly different in functio nality , as note d belo[...]

1 18 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Presets — press to display the Preset Recall Options Men u , which enables you to recall all (or part) of a stored preset. In Chapter 5, refer to the “ Prese t Recall Options Menu ” section on page 208 f or details. Effects — press[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 11 9 4. Controller Orientation Controller Sections ^äéÜ~åìãÉêáÅ=hÉóé~Ç The figure below shows the Alphanumeric Keypad which is used for certain numeric functions on the Controller LC on ly . Figure 4-5. Alphanumeric Keypad, Controller LC The Alphan umeric Keyp ad enables you [...]

120 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections gçóëíáÅâ=pÉÅíáçå The figure below ill ustra tes the Joystick Section , which is identical on both Contro llers. Figure 4-6. Joystick Section When a PIP or Key is selected in the La yer Control Section , the butt on s in th e Joy[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 121 4. Controller Orientation Controller Sections Source — press to assign the Joystick to si zing an d positioning the source image within the PIP or Key boundaries. Please note: • In Source mode, the PIP or Key’s placement on screen remains static, while the image is adjusted withi[...]

122 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections j~ÅÜáåÉ=`çåíêçä=pÉÅíáçå The figure below illustra tes the Machine Contro l Section , which is reserved for controlling external devices. The section is only available on t he Con troller LC. Figure 4-7. Machine Control Secti[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 123 4. Controller Orientation Controller Sections mêÉëÉí=pÉÅíáçå The figures below illustrate the Preset Sections on each Controller mode l. Figure 4-9. Preset Section, Controller SC Figure 4-10. Preset Section, Controller LC A Preset is a register in which you can sto re and re[...]

124 Encore Presentation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Delete — hold down Dele te , then press the desire d Preset bu tton to delete that regi ster from memory . S T o delete pr eset 8 from me mory , press Delete + 8 . Next — press to recall the next valid Preset i n se quential order . Plea[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 125 4. Controller Orientation Controller Sections aÉëíáå~íáçå=_ìë The figures below illustrate the Destination Bus on each Controlle r model. Figure 4-1 1 . Destination Bus, Controller SC Figure 4-12. Destination Bus, Controller LC Each button on the Destination Bus represents a[...]

126 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections pçìêÅÉ=pÉäÉÅíáçå=_ìë The figures below illustrate the Source Selection Bus on each Controlle r . Figure 4-13. Source Selection Bus, Controller SC Figure 4-14. Source Selection Bus, Controller LC Please note the followi ng imp[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 127 4. Controller Orientation Controller Sections Following are descri pt ions of each button’s function on the Source Selection Bus . Source Buttons — press to assign the source to the blinking “mixer” button in t he Layer Control Section . • When the source button is lit and bl[...]

128 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections i~óÉê=`çåíêçä=pÉÅíáçå The figures below illustrate the Layer Control Sectio n on each Controller . Figure 4-15. Layer Control Section, Controller SC Figure 4-16. Layer Control Section, Controller LC The buttons in the Lay er [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 129 4. Controller Orientation Controller Sections Following are descript ions of each button in the Layer Contr ol Section . Background Buttons — press to select an unscaled background ( A or B ) on Preview for transition to or from Program. The button bli nks when selected, and the BG I[...]

130 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections • T o clear a layer from Preview (so that it will transition off Program), press the desired layer button, th en press Clear Layer . This action tu rns the butt on off, and if the Red LED ab ove th e button is lit, the layer t ransitions [...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 131 4. Controller Orientation Controller Sections i~óÉê=cìåÅíáçåë=pÉÅíáçå The figures below illustrate the Layer Functions Section on each Controller . Figure 4-17. Layer Functions Section, Controller SC Figure 4-18. Layer Functions Section, Controller LC The buttons in th[...]

132 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections Clone — for widescreen conf igurations only , press to make an exact copy of a layer onto the opposite screen. All parameters of th e PIP or Key are cloned, incl uding the source’s shadow , key effects, border and size. Once clone d, yo[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 133 4. Controller Orientation Controller Sections Preview OSD — Clear Layer — press to remove the currently select ed (blinking) layer from Preview — in preparation for transitioning it off Program. The butt on can be used to clear backgrounds, PIPs, Keys and the DSK. In Chapter 7, r[...]

134 Encore Prese ntation System • User ’ s Guide • Rev 04 4. Controller Orientation Controller Sections iáîÉ=pïáíÅÜ=pÉÅíáçå The figure below ill ustra tes the Live Switch Section on both Control ler models. Figure 4-19. Live Switch Section The buttons in the Li ve Switch Section enabl e you to ente r two types of “li ve” mod[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 135 4. Controller Orientation Controller Sections qê~åëáíáçå=pÉÅíáçå The figures below illustrate the T ransition Sec t io n on each Controller . The sect ions are essentially identical. Figure 4-20. T ransit ion Sect ions Descriptions of each button and con trol are provided[...]

136 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections Go / + — Go / - — Note The Go / + function is curr ently not imple m e nt e d. GO / + Note The Go / - function is currently not implemented. GO / -[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 137 4. Controller Orientation Controller Sections dêçìé=`çåíêçä=pÉÅíáçå The figures below illustrate the Gr oup Control Sec tion on each Cont rolle r . The sections are essentially identical, except that the Controller SC has fewer group buttons. Figure 4-21. Group Control [...]

138 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections Learn — (Controller LC only) • T o learn (pro gram) a group butt on, activate th e desired destinat ions on the Destination Bu s , press and hol d Learn , th en press the desired Group button. This same method can be used t o add (or remo[...]

Encore Prese nt ation System • User’s Gu ide • Rev 04 139 4. Controller Orientation Controller Sections mêçÖê~ã=mêÉëÉí=pÉÅíáçå The figures below illustrate the Program Preset Section on each Controller . Figure 4-23. Program Preset Section, Controller SC Figure 4-24. Program Preset Section, Controller LC Descriptions of each b[...]

140 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections i~óÉêL^ìñ=`çåíêçä=pÉÅíáçå The figures below illustrate the Layer/Aux Control section on each Controller model . Figure 4-25. Layer/Aux Control Section, Controller SC Figure 4-26. Layer/Aux Control Section, Controller LC The b[...]

Encore Prese n t ation System • User’s Gu ide • Rev 04 141 4. Controller Orientation Controller Sections AUX — (Controller LC only) All — (Controlle r LC only) Note The AUX button in the Layer/Aux Control Sectio n is not implemented.0 AUX Note The ALL button in the Layer/Aux Co ntrol Section is not currently implemented. All[...]

142 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections qê~åëáíáçå=cìåÅíáçåë=pÉÅíáçå The figures below illustrate the T ransition Fu nc tio ns Section on each Controller . Figure 4-27. T ransition Functions Section, Controller SC Figure 4-28. T ransition Functions Section, Co[...]

Encore Prese n t ation System • User’s Gu ide • Rev 04 143 4. Controller Orientation Controller Sections Swap — in “Mix Mode” for a given layer (with the Sp li t button off), press Swap to allow both PIPs in the mixer to be located independently . • Layers A and B can be position ed and sized anywhere as desired. • Mix Source and Sw[...]

144 Encore Presentation System • User ’s Guide • Rev 04 4. Controller Orientation Controller Sections rëÉê=hÉó=pÉÅíáçå The figure below ill ustra tes the User Key section on t he Controlle r LC. The Controller SC does not have User Keys. Figure 4-29. User Key Section, Controller LC The buttons in the User Key Section a re programma[...]

Encore Prese n t ation System • User’s Gu ide • Rev 04 145 RK==jÉåì=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes all Encore system m enus, including how t hey are accessed, the functions that are availab le, and descriptions o f each menu tree (in bl ock diagram format). The following topics are di scussed: • C[...]

146 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Conventions in this Chapter `çåîÉåíáçåë=áå=íÜáë=`Ü~éíÉê Please note the following important conven tions used in this chapter: • Button lab els on the T ouch Screen are shown in bold upp ercase letters between braces. S Press {BORDR} to … • [...]

Encore Prese n t ation System • User’s Gu ide • Rev 04 147 5. Menu Orientation Home Menu eçãÉ=jÉåì The figure below ill ustra tes the Home Menu (on the Controller LC): Figure 5-1. Home Menu, Controller LC The Home Menu is the syst em’s top level menu. T o access a menu, press th e desired button on the T o uch Screen or in the Syste m[...]

148 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu fåéìí=jÉåì The following topics are di scussed in this sectio n: • Input Menu T ree • Input Menu Descr iption • Input Menu Functions • Input Sub Me nus fåéìí=jÉåì=qêÉÉ The figure below ill ustra tes the Input Menu Tre e : Figure 5-2[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 149 5. Menu Orientation Input Menu fåéìí=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the Input Menu : Figure 5-3. Input Menu (sample) The Input Menu is used to adjust all parameters relating to both dedica ted and routed inputs, including the physical sources connected[...]

150 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu fåéìí=jÉåì=cìåÅíáçåë The following Input Menu functions are provided: • Destination — indicat es the destination on which you are curren tly working (as selected on the Destination Bu s ). This fiel d is used for reference only , and cann[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 151 5. Menu Orientation Input Menu • Contrast — sets the input’ s contrast. ~ Adjustment rang e : 75% to 125% • Brightness — sets the i nput’s brightness. ~ Adjustment rang e : 75% to 125% • Gamma — sets the input gamma, ena bling you to match the source’s gamma. ~ Adjust[...]

152 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • Press { APPL Y FORMA T } to “accept” a manual ly selected input f ormat. In Appendix A, refe r to the “ Input an d Output Resolutio ns ” section on page 375 for details on all available resolutions. • Press {SIZING} to displa y the Sizing Menu[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 153 5. Menu Orientation Input Menu fåéìí=pìÄ=jÉåìë The following sub menus can be accessed f ro m the Input Menu : • Input Configurati on Menu • Aspect Ratio Menu • Sizing Menu • Color Balance Menu fåéìí=`çåÑáÖìê~íáçå=jÉåì From the Input Menu , press { C[...]

154 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • Press { SA VE } to save the selected input in th e designated input fil e. • Press { DELETE } to delete the selected input fil e from the designat ed destination. ^ëéÉÅí=o~íáç=jÉåì From the Input Menu , press { ASPECT RA TIO } to display th[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 155 5. Menu Orientation Input Menu páòáåÖ=jÉåì From the Input Menu , press { SIZING } to display one of two “context sensi tive” Sizing Menus — they change depending on the Sampling Mode selected on the Input Menu . • If 1:1 Sampling is selected, th e 1:1 Sizing Menu appea [...]

156 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Input Menu • H Active — sets the width of the active area. • H Position — sets the start of the active area’s horizontal of fset from H sync. • V T ot a l — fixed value which cannot be adjusted. • V Active — sets the number of vertical lines in the i[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 157 5. Menu Orientation Input Menu `çäçê=_~ä~åÅÉ=jÉåì From the Input Menu , press { COLOR BALANCE } to display the Color Ba lance Menu . Figure 5-8. Color Balance Me nu (sample) The Color Balance Menu changes depen ding on the se lected Input T ype . • ID — this field appear[...]

158 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu lìíéìí=jÉåì The following topics are di scussed in this sectio n: • Output Menu T ree • Output Menu Descripti on • Output Menu Functio ns • Output Sub Menus lìíéìí=jÉåì=qêÉÉ The figure below ill ustra tes the Output Menu Tr e e :[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 159 5. Menu Orientation Output Menu lìíéìí=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the Output Menu : Figure 5-10. Output Menu (sample) The Output Menu enables you to configure Processor and ScreenPRO-I I outputs, including the ability t o set widescreen parameters[...]

160 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu lìíéìí=jÉåì=cìåÅíáçåë The following Ou tput Menu functions are provided : • Destination — indicat es the destination on which you are curren tly working (as selected on the Destination Bu s ). If multiple de stinations are active, you c[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 161 5. Menu Orientation Output Menu båÜ~åÅÉÇ=lìíéìí=jÉåì From the Output Menu , press { E OUT } to display the Enhanced Output Menu . Figure 5-1 1 . Enhanced Output Menu (sample) The Enhanced Outp ut Menu sets up basic parameters for SP-II’s enhanced output. • Source — [...]

162 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu Enhanced Outp ut Settings Menu From the Enhanced Output Menu , press { SETTINGS } to display the Enhanced Output Settings Menu . Figure 5-12. Enhanced Output Settings Men u (sample) The Enhanced Output Se ttings Menu enabl es yo u to set specific p aramete[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 163 5. Menu Orientation Output Menu Enhanced Outp ut Test Pattern Menu From the Enhanced Output Menu , press { TEST P A TTERN } to display the Enhanced Output T est Pattern Menu . Figure 5-13. Enhanced Output T e st Pattern Menu (sample) The Enhanced Output T est Pattern Menu enables you t[...]

164 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu dÉåäçÅâ=jÉåì From the Output Menu , press { GLCK } to display the Ge nl oc k Menu . Figure 5-14. Genlock Menu (sample) The Genlock Menu tells the VP which type of analog genlock signal is connect ed t o the Processor ’s Genlock conne ctor . • [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 165 5. Menu Orientation Output Menu pÉííáåÖë=jÉåì From the Output Menu , press { SETTINGS } to display the Settings Menu . Figure 5-15. Settings Menu (sample) The Settings Menu set s sync parameters for your system’s monitors and projectors. • Output Monitor — selects the m[...]

166 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu qÉëí=m~ííÉêå=jÉåì From the Output Menu , press { TEST P A TTERN } to display the T est Pattern Menu . Figure 5-16. T est Pattern Menu (sample) The T est Pattern Menu enables you to display test patterns for projector alignment. • Output Monito[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 167 5. Menu Orientation Output Menu táÇÉ=pÅêÉÉå=pÉííáåÖë=jÉåì From the Output Menu , press { WIDE SCREEN } to display the Wide Screen Settings Menu . T wo dif ferent menus can appear , depending on the selected “array” of destinati ons, as configured on the Des ti n a[...]

168 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu Wide Screen Settings Menu (H Array) The Wide Screen Settings Menu (H Array) provides tools for wide screen setup and adjustment for horizontal arrays of destinations. Figure 5-19. Sample Wide Screen Settings Menu (H Array) The following funct ions are prov[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 169 5. Menu Orientation Output Menu • Marker Mode — enables and disables the wide screen markers, to show the boundaries of active da ta. In Chapter 7, refer to the “ Wide Screen Markers ” section on page 305 for details. • Overlap Width — sets the horizontal overlap (in pixels[...]

170 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Output Menu • T otal H Res — sets the total number of horizontal pixels in the overall w ide screen display . The formula is: # screens * horizontal output resolution - (H overlap * (# screens - 1)) As you adjust the T otal H Res , the H Overlap value tracks. Note[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 171 5. Menu Orientation Output Menu Feather Setup Menu From the Wide Screen Settings Menu , either (V Array) or (H Array) , press {FEA THER SETUP} to display the Feather Se tup Menu . Figure 5-21. Feather Setup Menu (sample) The Feather Setup Menu enables you to adjust the ho rizontal and [...]

172 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu póëíÉã=jÉåì The following topics are di scussed in this sectio n: • System Menu T r ee • System Menu Descri ption • System Sub Menus póëíÉã=jÉåì=qêÉÉ The figure below ill ustra tes the System Menu Tr e e : Figure 5-22. System Menu [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 173 5. Menu Orientation System Menu póëíÉã=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes the System Menu : Figure 5-23. System Menu (sample) T o access the menu: • Press {SYSTEM} on the Home Menu , or press System in the Keypad Section . The System Menu enables you to[...]

174 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { INPUT P A TCH } to display the Input Source Patch Menu . Refer to the “ Input Source Patch Menu ” section on page 188 for details. • Press { ROUTER SETUP } to display the Router Specification Menu . Refer to the “ Router Specification M[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 175 5. Menu Orientation System Menu póëíÉã=oÉëÉí=jÉåì From the System Menu , press { RESET } to display the System Reset Menu : Figure 5-24. System Reset Menu (sample) The Reset Menu enables you to perform various syst em reset functions . The following functions are provided: [...]

176 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu pçÑíï~êÉ=sÉêëáçå=jÉåì From the System Menu , press { SW VER } to display the Sof tware V e rsion Menu . Figure 5-25. Software V ersion Menu (sample) The Softw are V ersion Menu displays the software versions for all connected Video Processor[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 177 5. Menu Orientation System Menu aá~ÖåçëíáÅë=pÉíìé=jÉåì From the System Menu , press { DIAG } to display the Diagnostics Setup Menu . Figure 5-26. Diagnostics Setup Menu (sample) The Diagnostic s Setup Menu enables you to perform a variety of diagnostic tests on the Cont[...]

178 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu Widescreen Li nk Diagnostics Menu From the Diagnostics Setu p Menu , press { LINKS } to display the W idescreen Link Diagnostics M enu . Figure 5-27. Widescreen Link Diagnosti cs Menu (sample) The Widescreen Link Diagnostics Me nu enables you to te st the [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 179 5. Menu Orientation System Menu Rotary Encoder Menu From the Diagnostics Setu p Menu , press { ROT A R Y ENCOD ER } to displa y the Rotary Encoder Menu . Figure 5-28. Rotary Encoder Menu (sample) The Rotary Encoder Menu enabl es you to test the functionalit y of each rotary encoder , d[...]

180 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu TBar & Joystick Menu From the Diagnostics Setu p Menu , press { TBAR & JOYSTICK } to display the TBar & Joystick Diagno stic s Menu . Figure 5-29. TBar & Joystick Diagnostics Menu (sample) The TBar & Joystick Diagn ostics Menu enable s [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 181 5. Menu Orientation System Menu Key Detect Menu From the Diagnostics Setu p Menu , press { KEY DETECT } to display the Key Detect Menu . Figure 5-30. Key Detect Menu (sample) The Key Detect Menu shows you the key that is pressed, its status (pressed or released) its scan code and its l[...]

182 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu aÉëíáå~íáçå=pÉíìé=jÉåì From the System Menu , press { DEST SETUP } to display the Dest in a tio n Setu p Me nu . Figure 5-31. Destination Setup Menu (sample) The Destinatio n Setup Menu enab les you to define each destinatio n. The followin[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 183 5. Menu Orientation System Menu • VP (SP) to Add — list s all available VP , VPx or ScreenPRO-IIs that can be assigned to the destinatio n. If a Processor is currently assigned to anoth er destination, it wi ll not appear in the list. Pr ocessors are id en tified by ID. • VP (SP)[...]

184 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { REMOVE } to remove the selected VP , VPx or ScreenPRO-II (on the VP [SP] to Remove line) from the current destination configuration. • Press { REMOVE ALL } to remove all units from t he current dest ination. Aux Setup Menu From the Destinatio[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 185 5. Menu Orientation System Menu • Router Output — sel ects the specific router output designated as an Aux (as assigned on the router ’s Output Patch Menu ). • Press {RESET} to return all fie lds to < UNDEFINED >. When an ImagePRO Aux or Pr ePRO-II A ux destination “typ[...]

186 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • DVI Router Output — selects the Aux router output (as assigned on the router ’s Output Patch Menu ). (Not applicabl e to PrePRO-II Aux destinations.) • ImagePRO Inpu t — selects the Image PRO input to which the route r output is connected. (Not[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 187 5. Menu Orientation System Menu kÉíïçêâ=pÉíìé=jÉåì From the System Menu , press { NETWORK SETUP } to display the Network Setup Menu . Figure 5-34. Network Setup Menu (sample) For reference only , the Network Setup Menu displays the available IP range for t he Encore system[...]

188 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì From the System Menu , press { INPUT P A TCH } to display the Input Source Patch Menu . Figure 5-35. Input Source Patch Menu (sample) The Input Source Patch Menu en ables you to patch router inputs to specific source [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 189 5. Menu Orientation System Menu • Router Input — Applies to Rou ter connecti ons — selects the route r input th at you wish to associa te with the sou rce. The range depends on the number of inputs defined in the Router Specif ic at ion Menu . • ID — Applies to d irect connec[...]

190 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu oçìíÉê=péÉÅáÑáÅ~íáçå=jÉåì From the System Menu , press { ROUTER SETUP } to display the Rout er S pecificati on Menu . Figure 5-36. Router S pecification Menu (sample) The Router Specification Menu enables you to de fine input, outpu t an[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 191 5. Menu Orientation System Menu ~ D/As must be set up like routers. This enables yo u to define which D/A outputs are patched to which specific Video Processor connectors. • Number of Inputs — identifies the number of inputs on the selected router . • Number of Output s — ident[...]

192 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu • Press { NEXT IP QUAD } to advance to the next 3-digi t set of numbers in the address. Use the ADJ knob in the normal manne r to change the digi ts. • Press { TEST COMM } to test communication s with the defined router: ~ If the test is successful, a [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 193 5. Menu Orientation System Menu Lantronix Setup Menu On the Router Specif ic ati on Menu , when Communic ation T ype is set to LANTRONIX , press { COMM SETUP } to display the Lantroni x Set up Menu : Figure 5-39. Lantronix Setup Menu (sample) The Lantronix Setup Me nu enables you to se[...]

194 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation System Menu lìíéìí=m~íÅÜ=jÉåì From the Router Specification Me nu , press { OUTPUT P A TCH } to d isplay the Outpu t Patch Menu . Figure 5-40. Output Patch Menu (sample) After a router is selected on the Router Specification Menu , the Output Patch Menu ena[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 195 5. Menu Orientation System Menu T o use this feature, perfo rm the following steps: a. Dial in the first out put number from which you want t o start. b. Define the VP/SP ID and the VP/SP input to which yo u want to connect this output. c. Press { ADD P A TCH } . From th is point, pres[...]

196 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=jÉåì The following topics are di scussed in this sectio n: • Miscellane ou s Menu T ree • Miscellane ou s Menu Descrip tio n • Miscellaneou s Sub Menus jáëÅÉää~åÉçìë=jÉåì=qêÉÉ The figure below ill u[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 197 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=jÉåì=aÉëÅêáéíáçå The Miscellaneous Me nu enables you to access Encore functi on s that do not fall into other distinct me nu cat egories. Figure 5-42. Miscellaneous Menu T o access the menu: • Press MISC on [...]

198 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu jáëÅÉää~åÉçìë=pìÄ=jÉåìë The following sub menus can be accessed f ro m the Miscellane ou s Menu : • Console Port Setup Menu • Lockout Code Menu • EDID DVI Input Format Menu • Video Processors ID Definitio n Men u • LCD Set[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 199 5. Menu Orientation Miscellaneous Menu içÅâçìí=`çÇÉ=jÉåì From the Miscellane ous Menu , press { LOCK } to display the Lockout Code M enu : Figure 5-44. Lockout Code Menu (sample) The Lockout Co de Menu enables you to define a programmable lockout code, so that the console c[...]

200 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu T o enter a new code (for bo th Controllers), use the first eight numbered buttons on the Preset Bus , and t hen confirm the new code. In Chapter 7, refer to the “ Enab le/Disable Cont roller Lockout ” sect ion on page 352 for instructions on us[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 201 5. Menu Orientation Miscellaneous Menu Please note the following important poi nts regarding EDID: • For the external computer to correct ly see the EDID data, first turn on Encore power . The n connect the DVI cabl e from the computer ’s video card to one of Encore’s mixer layer[...]

202 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu sáÇÉç=mêçÅÉëëçêë=fa=aÉÑáåáíáçå=jÉåì From the Miscellane ous Menu , press { DEFINE VP ID } to display the Video Processors ID Definition Menu : Figure 5-47. Video Processors ID Definition Menu (sample) The Video Processors ID[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 203 5. Menu Orientation Miscellaneous Menu i`a=pÉííáåÖë=jÉåì From the Miscellane ous Menu , press { LCD SETTINGS } to show the LCD Settings Menu : Figure 5-48. LCD Settings Menu (sample) The LCD Settings Menu enables you to adjust t he contrast and brightness setti ngs for the LC[...]

204 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu rëÉê=mêÉÑÉêÉåÅÉ=jÉåì From the Miscellane ous Menu , press { USER PREF } to display the User Preference Menu : Figure 5-49. User Preference Menu (sample) The User Preference Menu enables you to set a variet y of user parameters. The fo[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 205 5. Menu Orientation Miscellaneous Menu transition. W hen User Effect is pressed on the controller , the “custom” transition properties are applied to th e current transiti on. ~ T rans T ype — enables you to select any availabl e transition type, including a mix and all availab l[...]

206 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Miscellaneous Menu _~ÅâìéLoÉëíçêÉ=jÉåì From the Miscellane ous Menu , press { BACKUP RESTORE } to display the Backup/ Restore Me nu : Figure 5-50. Backup/Restore Menu (sample) The Backup/Re store Menu enab les you to back up and restore system configurati[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 207 5. Menu Orientation Miscellaneous Menu Current Backup Menu From the Backup/Resto re Menu , press {CHECK CARD} to display the Current B ackup Menu . This menu only appea rs if a Flash Memory Card is present. Figure 5-51. Current Backup Menu (sample) The following funct ions are provided[...]

208 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Preset Recall Options Menu mêÉëÉí=oÉÅ~ää=léíáçåë=jÉåì The Preset Recall Options Menu enables you to sele ct which part of a preset register you wish to recall. Figure 5-52. Preset Recall Options Menu T o access the menu: • Press PRESETS on the Home[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 209 5. Menu Orientation Effects Menu bÑÑÉÅíë=jÉåì The figure below illustra tes a sample Effect s Menu : Figure 5-53. Effect s Menu (sample) T o access the menu: • Press EFFECTS on the Home Menu , or press Effect s in the Keypad Section . The Effect s Menu allows you to modify a[...]

210 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Copy Setup Menu `çéó=pÉíìé=jÉåì The figure below ill ustra tes the Copy Setup Menu : Figure 5-54. Copy Setup Menu (sample) T o access the menu: • Press COPY in the Layer Function Section . Encore’s “ Copy ” function allows yo u to copy the parameters[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 21 1 5. Menu Orientation User Key Copy Setu p Menu rëÉê=hÉó=`çéó=pÉíìé=jÉåì On the Co ntroller LC only , the fi gure below illustrates a sampl e User Key Copy Setup Menu . The function is not available on the Controller SC . Figure 5-55. User Key Copy Setup Menu (sample) T o[...]

212 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Status Men u pí~íìë=jÉåì The Stat us M en u provides basic system status information: Figure 5-56. S tatus Menu (sample) T o access the Statu s Me nu : • Press ST A TUS in the Keypad Section , or press {ST A TS} from va rious menus (such as the Key Menu ). Th[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 213 5. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì The following topics are di scussed in this sectio n: • PIP Adjustment Menu T ree • PIP Adjustment Menu Description • PIP Adjustment M enu Functions • PIP Adjustment Sub Menus mfm=^ÇàìëíãÉåí=jÉå?[...]

214 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample PIP Adjustment Menu : Figure 5-58. PIP Adjustment Menu (sample) The PIP Adjustment Menu provides tools that enabl e you to adjust the “act ive” PIP . T[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 215 5. Menu Orientation PIP Adjustment Menu • Move Rate — adjusts the rate (in 0.1 second increments) for programmed PIP “moves” from keyframe to keyf rame. T o adjust, select the RA TE radio button and twist the Joystick Z-Axis knob. • Key Frame Effect — indicates the “mot i[...]

216 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu `äçåÉ=pÉíìé=jÉåì From the PIP Adjustment Menu , press {CLONE} to display the Clone Setup Menu , a sample of which i s shown below. Figure 5-59. Clone Setup Menu (sample) The Clone Setup Menu enables you to set parameters for a cloned lay[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 217 5. Menu Orientation PIP Adjustment Menu ~ Offset — both cloned images move together with a fixed pixel offset. For exampl e , if you ad j u st H Position , both images move left and right. If you adjust V Position , both images mo ve up and down. Figure 5-60. Clone Offset Mode — Sa[...]

218 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu _çêÇÉê=jÉåì From the PIP Adjustment Menu , press {BORDR} to display the Bo r de r Menu . Figure 5-62. Border Menu (sample) The Border Menu enables you to add a border t o a PIP , and adjust its p arame ters. The following funct ions are pro[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 219 5. Menu Orientation PIP Adjustment Menu pÜ~Ççï=jÉåì From the PIP Adjustment Menu , press { SHDOW } to display the Shadow Menu . Figure 5-63. Shadow Menu (sample) The Shadow Me nu enables yo u place a sha dow behind a PI P . The following funct ions are provided: • Mode — ena[...]

220 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu fã~ÖÉ=bÑÑÉÅíë=jÉåì From the PIP Adjustment Menu (or the Key Menu ), press {EFX} to display the Image Effects Menu . Figure 5-64. Image Effects Menu (sample) The Image Effects Menu enables you to creatively manipulate the selected PIP or[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 221 5. Menu Orientation PIP Adjustment Menu • Invert — enables you to invert all image colors. • Hue — adjusts the image’ s hue, by rotating color vectors thro ugh out the 360 degree color spectrum. • Mode — In the “ Strob e ” section, enabl es or disables the st robe mod[...]

222 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation PIP Adjustment Menu `ìëíçã=_çêÇÉê=jÉåì From the Border Menu , press {CUSTOM BORDER} to display the Custom Border Menu . Figure 5-65. Custom Border Menu (sample) The Custom Border Menu enables you to create and save custom bo rders. T o use the feature, st[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 223 5. Menu Orientation PIP Adjustment Menu • PIP Soft Edge — adjusts the soft edge that is applie d between the live PIP data and the inner border . The following parameters can be adjusted individually: ~ Soft Edge (%) ~ Soft Edge Curve ~ Soft Edge Gamma • Save — saves the custom[...]

224 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu hÉó=jÉåì The following topics are di scussed in this sectio n: • Key Menu T r ee • Key Menu Description • Key Menu Function s • Key Sub Menus hÉó=jÉåì=qêÉÉ The figure below ill ustra tes the Key Menu tree: Figure 5-66. Key Menu Tree All f[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 225 5. Menu Orientation Key Menu hÉó=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Key Menu , wh en Luma key is selected: Figure 5-67. Key Menu (sample) The Key Menu provides the tools to adjust the “active” key . T o access the menu: • Select a blue button i[...]

226 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu iìã~=hÉó=cìåÅíáçåë A Luma (luminance) key is one in which the hole-cutt i ng in formation is derived from the luminance (brightness) level of the key source. The following Key Menu functions are provided when Luma key is selected: • Invert Mode [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 227 5. Menu Orientation Key Menu • Blue Color — adjusts the blue component of the key color , from 0 to 1024. • Red Threshold — adjusts the key’s clip along the Cyan vector (as demonstrated using a CIE color chip chart). • Green Thresh old — adjusts the key’s clip along the[...]

228 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu • Fill Source — permanently set to the current mixe r ’s Layer A (e.g., [1A] ). • Press { ST A TS } to display the Stat us M en u . Refer to the “ Statu s Me nu ” section on page 212 for details. • Press { CLONE } to display the Clo ne S etup Me[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 229 5. Menu Orientation Key Menu • Blue — adjusts the blue component of the matte fill, from 0 to 1024. • Press { ST A TS } to display the Stat us M en u . Refer to the “ Statu s Me nu ” section on page 212 for details. • Press { KEY } to display the Key Menu . Refer to the “[...]

230 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Key Menu • V Position — indicates the Key’s position, relative to the vertica l cent er of the screen ( 00 ), as measured from the exact cen ter of the Key . Thus, the value 64 is 64 pixels above center . T o adjust, move the Joystick up and down. • Move Rate [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 231 5. Menu Orientation Crop Menu `êçé=jÉåì With a PIP or a Key selected, press Crop to display the Crop Menu . Figure 5-70. Crop Menu (sample) The Crop Menu enables you crop the sides of a PIP or a Key witho ut affecting the size of the source image. The followi ng functions are pro[...]

232 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåìë Tw o s i m i l a r Source Adjustmen t Menus are available: • If a PIP is selected: a. Press SOURCE (in the Joystick Sectio n ) to display the Input Source Adjustment Menu . • If a Key is selected: a[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 233 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=qêÉÉë The figure below ill ustra tes the two Source Ad ju stment Menu T rees . Figure 5-71. Source Adjustment Menu Trees All functions and su b menus are discussed in th e fo llowing sections. INPUT[...]

234 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå The figure below illustra tes a sample Input Source Adju stment Menu : Figure 5-72. Input Source Adjustment Menu (sample) The figure below illustra tes a sample Key Source Adjustme n[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 235 5. Menu Orientation Source Adjustment Menus pçìêÅÉ=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë The following Source Adjustment Menu functions are provided: • H Size — adjusts the source’s horizontal size. The “ % ” value indicates size as a percentage of the original P[...]

236 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Source Adjustment Menus Source Jo ystick Func tions At the bottom of the Input Sou rce Ad justment Menu and t he Key Source Ad ju stm e nt Menu , four radio buttons assign the Joyst ick to various source adjustment functions. • Press { TRACK } to lock H Size and V S[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 237 5. Menu Orientation Background Input Se tup Menu _~ÅâÖêçìåÇ=fåéìí=pÉíìé=jÉåì The BG (Background) Input Setup Menu enables you to select and define backg r ound sources A and B . For each background, you can choose bet ween a solid matte color , a DVI input, an analog[...]

238 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=fåéìí=pÉíìé=jÉåì=qêÉÉ The figure below ill ustra tes the Backgrou nd Input Setup Menu T ree . Figure 5-74. Background Input Setup Menu Tree All functions and su b menus are discussed in th e fo llowing sect[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 239 5. Menu Orientation Background Input Se tup Menu pÜ~êÉÇ=_~ÅâÖêçìåÇ=jÉåì=cìåÅíáçåë The figure below illustra tes a sample BG Input Setup Menu , showing shared functions: Figure 5-75. BG Input Setup Menu (sample) The following funct ions are shared — regardless o[...]

240 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=jÉåì=cìåÅíáçåë=Ô=j~ííÉ=qóéÉ The figure below illustra tes a sample BG Input Setup Menu when “ Matte ” is sele cted as the background type. Figure 5-76. BG Input Setup Menu — Matte T ype (sample) T[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 241 5. Menu Orientation Background Input Se tup Menu _d=j~ííÉ=jÉåì From the BG Input Setup Menu , press { MA TTE } to ac cess the BG Matte Menu . Figure 5-77. BG Matte Menu (sample) The Background Matte Menu enables you to create a solid backg round matte col or to use behind your PI[...]

242 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu _~ÅâÖêçìåÇ=E~åÇ=aphF=jÉåì=cìåÅíáçåë=Ô=asf=qóéÉ The figure below ill ustrates a sample BG Input Setup Menu when “ DVI ” is selected as t he background type. Figure 5-78. BG (and DSK) Input Setup Menu — DVI T y[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 243 5. Menu Orientation Background Input Se tup Menu _~ÅâÖêçìåÇ=E~åÇ=aphF=jÉåì=cìåÅíáçåë=Ô=^å~äçÖ=qóéÉ The figure below illustrates a samp le BG Input Setup Menu when “ Analog ” is select ed as the background type. Figure 5-79. BG (and DSK) Input Setup Menu[...]

244 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Background Input Setu p Menu • Contrast — sets the input’ s contrast. ~ Adjustment rang e : 75% to 125% • Brightness — sets the i nput’s brightness. ~ Adjustment rang e : 75% to 125% • Press { SA VE } to save the selected backgr ound input configurat ion[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 245 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê~Ä=jÉåì The following topics are di scussed in this sectio n: • Frame Grab Menu T r ee • Frame Grab Overview • Frame Grab Menu Descrip ti on • Frame Grab Sub Menus cê~ãÉ=dê~Ä=jÉåì=qêÉÉ The figure below ill ustra tes[...]

246 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê~Ä=lîÉêîáÉï The Encore system provides complete flexibility with regard to frame grabs: • T emporary Frame Stores — The Encore VP and VPx have three temporary (temp) fram e store s ( FG_1 , FG_2 and FG_3 ) which function as the [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 247 5. Menu Orientation Frame Grab Menu can capture into the sel ected frame store, save i t to permanent memory , or download a f rame grab from permanent storage f or use on-air. ~ For “stack” systems, selects one of six “temp” frame stores: • For the “bottom” st ack Proces[...]

248 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=dê ~Ä=k~ãÉ=jÉåì The Frame Gr ab Name Menu enab les you to name a frame that has been saved to permanent memory . A customer-supplied PS/2 keyboard is required (which conne cts to the KEYBOARD port on the rear of the Controlle r). Select[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 249 5. Menu Orientation Frame Grab Menu cê~ãÉ=bê~ëÉ=jÉåì The Frame Erase Menu enables you to permanently erase a selected fra me. This “destructive” process (which locks the c onsol e) takes from 20 to 30 seconds. Select a frame (in permanent memory) on the Frame Grab Menu , t[...]

250 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=p~îÉ=jÉåì The Frame Save Menu en ables you to save a selected frame grab into permanent memory in a selected register . This process (which locks the console) takes from 1 to 2 minutes (standard systems), or from 20 to 30 seconds (“ES?[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 251 5. Menu Orientation Frame Grab Menu cê~ãÉ=aÉäÉíÉ=jÉåì The Frame Delete Menu enables you to mark a selected permane nt frame as deleted — but the ERASE function i s still required for permanent deletion. Y ou can consider this as a “quick” delete functi on. Select a fra[...]

252 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation Frame Grab Menu cê~ãÉ=oÉÅ~ää=jÉåì The Frame Recal l Menu enables you to recall a selected frame from permanent sto rage back into temporary memory . • With standard systems: ~ Select the temporary frame st ore int o which you want to recall the associated [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 253 5. Menu Orientation DSK Menus aph=jÉåìë The following topics are di scussed in this sectio n: • DSK Menu T ree • DSK Adjustment Menu • DSK Input Setup Menu aph=jÉåì=qêÉÉ The figure below ill ustra tes the DSK Menu T ree . Figure 5-91. DSK Menu T ree All functions and su[...]

254 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus aph=^ÇàìëíãÉåí=jÉåì The DSK Adjustment Menu provides the tools necessary to adjust the DSK (D ownstrea m Key . T o access the menu: • Press DSK in th e Layer Control Section . The available DSK Adjustment Menu functi ons change , dependin g upo[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 255 5. Menu Orientation DSK Menus • Gain — adjusts the sensiti vity of the keyer , enabling you to change t he sharpness of the keyed image. Gain only affects the key hole, as set by the clip. ~ Adjustment rang e : 0 to 1023.99 • Opacity — adjusts the opacity of the keyed image, fr[...]

256 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus • Blue Color — adjusts the blue component of the DSK colo r , from 0 to 1024. • Red Threshold — adjusts the DSK’s clip along the Cyan vector (as demonstrated using a CIE color chip chart). • Green Thresh old — adjusts the DSK’s clip along the[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 257 5. Menu Orientation DSK Menus aph=fåéìí=pÉíìé=jÉåì The figure below illustra tes a sample DSK Input Se tup Menu : Figure 5-94. DSK Input Setup Menu (sample) The DSK Input Setup Menu enables you to set up the DSK input. T he menu changes depending on the selecte d input “ty[...]

258 Encore Presentation System • User ’s Guide • Rev 04 5. Menu Orientation DSK Menus ~ Analog — an analog graphic from a compu ter or other analog source is the DSK source. Refer to the “ Backgroun d (and DSK) Menu Functions — Analo g T ype ” section on page 243. ~ FG_1 , FG _2 , FG_3 — a temporary frame store is the DSK source. Re[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 259 SK==pó ëí Éã=p Éíìé få=qÜáë=`Ü~éíÉê This chapter provid es comprehensive instructi ons for setting up the Encore system. The following topics are discussed: • Setup Prer equisite s • System Setup Sequence • ID Setup and Rem ote Enable • Peripheral Power Up and[...]

260 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Setup Prerequisites pÉíìé=mêÉêÉèìáëáíÉë Before starting to set up y our Encore system, please review the following prerequisites: • Ensure that you are familiar with all Encore system hard ware. Refer to Chapter 2, “ Hardware Orientation ” on p age 4[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 261 6. System Setup System Setup Seque nce póëíÉã=pÉíìé=pÉèìÉåÅÉ This section provides a top level view of the ent ire Encore set up procedure, plus links to each individual sequence.  Preliminary steps: 1. “ ID Setup and Remote Ena bl e ,” page 262. 2. “ Periphera[...]

262 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup ID Setup and Remote Enable fa=pÉíìé=~åÇ=oÉãçíÉ=bå~ÄäÉ= Encore system setup: Step 1 . In this procedure, you wil l set up individual Encore Video Processor IDs. If ScreenPRO-II, PresentationPRO-II and/or ImagePR O units are used as destinations, you wi ll al[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 263 6. System Setup ID Setup and Remote Enable b. Ensure that th e Image PRO is running software version 2.30 or greater . • T o verify , press SETUP > TECH SUPPORT to display the T ech Support Menu . The version is listed on line 2. •P r e s s ESC repeatedly to ret urn to the top l[...]

264 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Peripheral Power Up a nd Status Check mÉêáéÜÉê~ä=mçïÉê=ré=~åÇ=pí~íìë=`ÜÉÅâ Encore system setup: Step 2 .  Use the following steps to power up your routers and check system status: 1. Power up all routers in your syst em, and allows them to fully [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 265 6. System Setup Peripheral Power Up and Stat us Check açïåäç~ÇáåÖ=`çÇÉ When an incompatibility exists between software code versions, all buttons wil l flash on the Controller console. In this sit uation, the System Status Menu automatically appears wit h the message “ Pl[...]

266 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Return to Factory De fault oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí Encore system setup: Step 3 . Prior to performing any setup proce dures, it is recommended that you perf orm a factory reset — in order to reset all router tables an d source mappings. The procedure g[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 267 6. System Setup Touch Screen Calibration qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå Encore system setup: Step 4 . The calibration proce dure is an excellent starting point prior to setu p. S Prerequisite — Ensure that yo u are familiar with the LCD Settings Me nu . In Chapter 5 , refe[...]

268 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Programming EDID mêçÖê~ããáåÖ=bafa Encore system setup: Step 5 The EDID (Extended Display Iden ti fication Data) programming procedure is a prer equisite for background and DSK setup. The procedur e guarantees proper commu nications at the preferred resolution bet[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 269 6. System Setup Restore from Flash Memory Card oÉëíçêÉ=Ñêçã=cä~ëÜ=jÉãçêó=`~êÇ Encore system setup: Step 6 (op tional) In this procedure, you will restore your system co nfiguration from flash memory — provided that you previously backed up your system to the flash[...]

270 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Router Setup oçìíÉê=pÉíìé Encore system setup: S tep 7 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Router Specification Menu . In Chapter 5, refer to t he “ Router Specification Menu ” section on page 19 0. ~ Comm Setup Me nu[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 271 6. System Setup Router Setup 15. T est communications: ~ For serial and Et hernet controlled rou ters, press {TEST COMM} . ~ For Lantronix devices, pre ss { DISCOVER L TRX } . Note that {TEST COMM} can be used for Routers connected to Lantronix d evices once the Lantronix device has be[...]

272 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Router Setup St ack config urations — please note: ~ When using a ro uter with a single or wide screen “stack” configuration, router outputs are require d to go to all physical inputs for both t he bottom and top Processors, provided that all inputs are required to [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 273 6. System Setup Router Setup e. Repeat step 19 to designate additional Aux outpu ts. 20. Press {BACK} to return to the Router Specificat ion Menu . 21. Repeat from ste p 6 for the next router that you wish to assign. 22. When you have configured all of your system’s routers, on the R[...]

274 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup D/A Setup aL^=pÉíìé Encore system setup: S tep 8 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Router Specification Menu . In Chapter 5, refer to t he “ Router Specification Menu ” section on page 19 0. ~ Output Patch Menu . In Chap[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 275 6. System Setup Input Patching fåéìí=m~íÅÜáåÖ Encore system setup: S tep 9 S Prerequisite s — Ensure that you are familiar with the Input Source Patch Menu . In Chapter 5, refer to the “ Input Source Patch Menu ” section on page 188. This procedure enables you to associ[...]

276 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Input Patching  Use the following steps to patch inputs to specific source buttons: 1. In the System Keypad , press SYSTEM to display the System Menu . 2. Press {INPUT P A TCH} to display the Input Source Patch Menu . 3. On the Source Number line, select the source but[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 277 6. System Setup Destination Setup aÉëíáå~íáçå=pÉíìé Encore system setup: S tep 10 In this procedure, you will set up the Encore system’s single and wide screen de stinations. Once assigned, the associ at ed button(s) on the Desti nation Bus will be active. S Prerequisite[...]

278 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Destination Setup This completes the proced ure for defining “standard” and “stack” destinations. The selected but tons on the D estination Bus are now active . sÉêíáÅ~ä=_äÉåÇ=pÉíìé T o configure an Encore system for vertical array blendin g, please [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 279 6. System Setup Destination Setup pÅêÉÉåmolJff=aÉëíáå~íáçå=pÉíìé In this procedure, you will set up Screen PRO-II systems as single screen destinations. Once assigned, the associ at ed button(s) on the Desti nation Bus will be active. S Prerequisite s — Ensure that [...]

280 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Destination Setup pÅêÉÉåmolJff=ïáíÜ=bl` The Enhanced O utp ut Card (EOC) is an optional (factory installed) card that provides additional output fo rmats, and expands the still store capabilities of ScreenPRO-II. As an input, the EOC takes either the Preview or P[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 281 6. System Setup AUX Destination Setup ^ru=aÉëíáå~íáçå=pÉíìé Encore system setup: Step 11 In this procedure, you will set up the system’s Aux (Auxiliary) destinations. S Prerequisite s — Ensure that you are familiar with the following menus: ~ Destination Setup Me nu . [...]

282 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup AUX Destination Setup ^ìñ=aÉëíáå~íáçå=pÉíìé This section provides instructions for set ting up an Aux destination.  Use the following steps to set up an Aux destinati on: 1. Ensure that you have pro perly configured one (or more) rout er out puts as “A[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 283 6. System Setup AUX Destination Setup fã~ÖÉmol=çê=mêÉmolJff=^ìñ=aÉëíáå~íáçå=pÉíìé This section provides instructions for set ting up ImagePRO Aux and PrePRO-II Aux destinations. Once assigned, the associated button (s) on the Controller ’s Destination Bus will b[...]

284 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup AUX Destination Setup 11 . In the SDI section: a. On the SDI Router Name lin e, select the rout er from which SDI sources will be routed to the Image PRO (or PrePRO-II). b. On the SDI Router Output li ne, select the specific route r output that you designated as an Aux ou[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 285 6. System Setup Output Format Setup lìíéìí=cçêã~í=pÉíìé Encore system setup: S tep 12 S Prerequisite s — Ensure that you are familiar with the Output Menu . In Chapter 5 , refer to the “ Output Menu Fu nc tio ns ” section on page 160. In this procedure, you wil l co [...]

286 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Sync Setup póåÅ=pÉíìé Encore system setup: S tep 13 S Prerequisite s — Ensure that you are familiar with the Settings Menu . In Chapter 5 , refer to the “ Settings Menu ” section on page 165. In this procedure, you will se t up sync parameters for the monitor[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 287 6. System Setup Genlock Setup dÉåäçÅâ=pÉíìé Encore system setup: S tep 14 S Prerequisite s — Ensure that you are familiar with the Genlock Menu . In Chapter 5 , refer to the “ Genlock Menu ” section on page 164. In this procedure, you wil l se t up Genlock for each dest[...]

288 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Projector Setup mêçàÉÅíçê=pÉíìé Encore system setup: S tep 15 S Prerequisite s — Ensure that you are familiar with the following: ~ Te s t P a t t e r n M e n u . In Chapter 5, refer to the “ T est Pattern Menu ” section on page 166. ~ Wide Screen Menu .[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 289 6. System Setup Projector Setup 11 . Once the proje ctor is properly set, turn the Raster Box and the Mode off. 12. Press { BACK } to retur n to the Output Menu . 13. Repeat from ste p 2 for additional single screen dest ination projecto r set ups. 14. When all projectors for single sc[...]

290 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Projector Setup 13. Scroll to the Marker Mode line and enable (o r disable) the system’s wide screen markers. If enabled, you can see the bound aries of active data on Previ ew . 14. Scroll to the Overlap Wid th line and ente r the desired overlap between projectors. Th[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 291 6. System Setup Background Setup _~ÅâÖêçìåÇ=pÉíìé Encore system setup: S tep 16 S Prerequisite s — Ensure that you are familiar with the following menus: ~ Background I nput Setup Menu . In Chapter 5, refer to the “ Background In put Setup Menu ” sectio n on page 237.[...]

292 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Background Setup f. Press { SA VE } . 5. T o configur e a frame grab b ackground: a. Ensure that you have captured frame (s) into temporary memory , or saved frame(s) into permanent memory . In Chapter 7, re fer to the “ Working with Frame Grab s ” section on page 355[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 293 6. System Setup Input Setup fåéìí=pÉíìé Encore system setup: S tep 17 S Prerequisite s — Ensure that you are familiar with the Input Menu . In Chapter 5 , refer to the “ Input Men u ” section on page 148. This procedure provides steps for setting up the system’s in puts[...]

294 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Input Setup This action isolates the sou rce within the PIP , di splays a gray background, turns off borders and shadows, and displays t he Input Menu . 4. On the Source Selection Bus , select the source that you want to set u p. 5. Press { FORCE ACQUIRE } to perform the [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 295 6. System Setup Input Setup • Scroll to the H Position line and set the start of the active area’s horizontal of fset from H sync. • Scroll to the V Active line and set t he number of vertic al lines in the image. • Scroll to the V Position line and set t he start of the active[...]

296 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup DSK Setup fåéìí=pÉíìé=kçíÉë Yo u do not have to repeat the input set up pro cedure for other destinatio ns if either of the following criteria are met: • Y our othe r destinations use sources tha t are patched to the same router . • Y our othe r destinatio[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 297 6. System Setup DSK Setup ~ For wide screen destinations on ly: •S e l e c t All to set up all the DSK on Processors. •S e l e c t t h e ID of an individual processor . 5. T o configure the DSK with no input: a. Scroll to the Ty p e line and select None . b. Press { SA VE } . 6. T [...]

298 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup DSK Setup 8. T o configure an Analog source as th e DSK: a. Ensure that your analog source is prop erly connected to the Video Processor chassis. In Appendix A, refer to the “ DVI-I Connector Pinout s ” section on page 370 for pinout details. b. Scroll to the DSK Inpu[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 299 6. System Setup Saving the Setup p~îáåÖ=íÜÉ=pÉíìé Encore system setup: S tep 19 When all system setup p rocedures have been co mplete, press SA VE in the System Keypad . This action saves the state of the Controller in non-vola til e memory . Once pressed, the T ouch Screen [...]

300 Encore Presentation System • User ’s Guide • Rev 04 6. System Setup Back up System _~Åâ=ìé==póëíÉã Encore system setup: S tep 20 S Prerequisite s — Ensure that you are familiar with the Backup/Restore Menu . In Chapter 5, refer to the “ Backup/Restore Menu ” section on page 206 for details. In this procedure, you will back [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 301 T K==léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter includes operati onal instructions fo r all Encore modes and functio ns. The following topics are discussed: • Prerequisite s • Operational Co nfiguration • Using the Alphanume ric Keypad • Using the PS/2 Keyboard ?[...]

302 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Prerequisites mêÉêÉèìáëáíÉë Prior to reviewing this chapter , please ensure the followin g: • All system destinations are properly c onfigured. In Chapter 6, refer to the “ Destination Setup " section on page 27 7 fo r details. • All system inputs (so[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 303 7. Operations Operational Conf iguration léÉê~íáçå~ä=`çåÑáÖìê~íáçå The following topics are di scussed in this sectio n: • Monitor Layout • T ouch Screen Calibr ation • Wide Screen Markers • Lookahead Pre view • Understanding Raster Boxes • A Word About L[...]

304 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion • Wide Sc reen Applic ation — For optimum viewing in all wide screen a pplications, place all Preview mo nito rs on the left, an d all Pro gra m mo ni to rs on th e ri gh t. Figure 7-2. Wide Screen Application Layout • V ertical Blends and A[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 305 7. Operations Operational Conf iguration qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå As an excellent p rerequisite to al l operatin g proced ures, it is recommended that you calibrate the T ouch Screen.  Use the following steps to calibrate your T ouch Screen displa y: 1. In the Syste[...]

306 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion • Center Justified Ma rkers The figure below illustra tes the two Wide Screen Markers in a center justi fied configuration. Images between th e two vert ical gre en lines are projected. Images outside of the lines are not. Figure 7-5. Wide Scree[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 307 7. Operations Operational Conf iguration • Conversely , you’ll always know what PIPs and keys to you wish to clear — to visually remove elements FROM Program . råÇÉêëí~åÇáåÖ=o~ëíÉê=_çñÉë When Raster Bo xes are enabled on Preview , each PIP or Key is surrounded [...]

308 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Operational Configurat ion  Remember that Raster Box size can be adjusted: 1. In the System Keypad , press OUTPUT to display the Output Me nu . 2. On the Destination Bus , select the destinatio n that you want to configur e. 3. Press { SETTINGS } to display the Setti ngs[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 309 7. Operations Operational Conf iguration 7. On both Controll ers, under the Mix Key headi ng, select a custom transition rate for the Mix button (if desired). 8. On the small Controller only , under the User Effect heading, select a custom transition type, rate and edge for the User Ef[...]

310 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using the Alphan umeric Keypad rëáåÖ=íÜÉ=^äéÜ~åìãÉêáÅ=hÉóé~Ç On the Co ntroller LC onl y , the Alphanumeric Keypad enables you to enter and change numeric fields (o n the T ouch Scre en) wi thou t ha ving to use a rotary knob. The alphanumeric keypad is[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 31 1 7. Operations Using the PS/2 Keyboard 4. For numeric fie lds with decimal p oints, the decimal point i s fixed: S T o enter 120.3 , press 1 , 2 , 0 , 3 , ENTER . 5. During the entry process, press CLEAR at any time t o delete the last nu mber entered. Press CLEAR repeatedly to delete [...]

312 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Groups tçêâáåÖ=ïáíÜ=dêçìéë A Group is a single button that represents a certain number of destinations, as programmed by the use r . For example , the Group 1 button can represent desti nation 1 or destinations 1 , 2 and 3 . • On the Cont rolle[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 313 7. Operations Working with Groups ^ÇÇáåÖ=çê=oÉãçîáåÖ=aÉë íáå~íáçåë=Ñêçã=~=dêçìé  Use the follow ing steps to add (or re move) a destinat ion to/from an existing group: 1. Controller LC and SC: a. Press and hold the Gro up button to which you want to a[...]

314 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Groups råäÉ~êåáåÖ=~=dêçìé  Use the following steps to unlearn (complet ely clear) a group button — so t hat it no longer lights: 1. Controller LC: a. Clear all destinati ons on the Destination Bus ( Clear + All ). b. Press and ho ld Learn . c. [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 315 7. Operations Working with Destina tions tçêâáåÖ=ïáíÜ=aÉëíáå~íáçåë Destinations can be configured as sing le screens (projectors), multiple screens (in wide screen applications), single or wide screen "s tack" configurations, ScreenPRO-II syste ms, auxilia[...]

316 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Destina tio ns oçìíáåÖ=pçìêÅÉë=íç=^ìñ=aÉëíáå~íáçåë When using Aux destinations, remember that you are routing individual router input s to router outputs, which in turn are connect to other devices. Y ou are not routing t he output of [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 317 7. Operations Working with Destina tions iáîÉ=pïáíÅÜ=^ìñ=oçìíáåÖ  Use the following steps to switch Aux destinati ons live. 1. On the Destination Bus , enable the de sired Aux destinat ion(s). 2. Press Shift + Source (in the Live Sw itch Section ). The Source button [...]

318 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Destina tio ns sáÉïáåÖ=^ìñ=oçìíÉë Aux routes can be viewed ind i vidua lly , without affecting other routes current ly in effect.  Use the following steps to view an Aux route: 1. On the Destination Bus , press and hold the desired Aux destinat [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 319 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=i~óÉêë The following topics are di scussed in this sectio n: • Switching Sources • Background Transitions • Understanding Split and Mix Modes • Working with PIPs in Split Mod e • Working with PIPs in Mix Mode • Mo[...]

320 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers • If a router is used for input connection, a source can be as signed to multip le layers simultaneously . • If you select a layer in the Layer Control Section that is lit (but not blinki ng), it will blink — and the corresponding “assig ned” s[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 321 7. Operations Working with Layers råÇÉêëí~åÇáåÖ=péäáí=~åÇ=jáñ=jçÇÉë Encore provides two different modes with which you can tran sition PIPs and Keys: • Spl i t M od e • Mix Mode péäáí=jçÇÉ With the Sp li t but ton lit, a mixer ’s two layers operate i[...]

322 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers ~ With To g g l e off, the source selected in Preview stays in Preview , once the transition is complete. Here, sources must be changed manually . Please note the following important poi nts regarding Mix Mode : • When neither layer is on Program, if y[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 323 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=mfmë=áå=jáñ=jçÇÉ In Mix Mode , a mixer’s layers are ganged toget her . Both layers can be perf ectly co- located on screen ( Mix Source mode), or both can operate indepe ndently ( Swap mode), but only one layer can be o[...]

324 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers 5. Crop — Press Crop (in the Joystick Section ) to display t he Crop Adjustme nt Menu . Select the type of crop , the aspect ratio, and the imag e’s H and V size. In Chapter 5 , refer to the " Crop Menu " section on page 231 for details. 6.[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 325 7. Operations Working with Layers tçêâáåÖ=ïáíÜ=hÉóë=áå=jáñ=jçÇÉ In Mix Mode , a mixer ’s layers are ganged together . Both Keys can be perfectl y co-located on screen ( Mix Source mode), or both can operate independ ently ( Swap mode), but only one layer can be on[...]

326 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers 8. Place your "cut" source on top of your "fill" source. 9. On the Key T ype line, select Cut + Fill . 10. On the Ke y Menu , use the Clip , Gain , Opacity and Invert controls to set the appearance of the key "hole" as desir[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 327 7. Operations Working with Layers 8. Source Size — Press Source (in the Joystick Sect ion ) to display the Key Source Adjustment Menu . Adjust the source image’s size and position with in the Key . In Chapter 5, refer to the " Source Ad justment Menu Descr iption " sectio[...]

328 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layers jçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã Encore enables you to modify layers directly o n Program, without first setting up a "look" on Preview . The mode is typical ly used for creating a "look" on Program (especia lly in conjun[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 329 7. Operations Working with Layer Functions tçêâáåÖ=ïáíÜ=i~óÉê=cìåÅíáçåë On each Controller , the Layer Functions Section and the T ransition Function Secti on provide numerous creati ve modes to en hance your pr esentation. The following topics are di scussed in th[...]

330 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions rëáåÖ=`äçåÉ== The Clone mode is designed for w idescreen configura tions only . It enables you to make an exact copy of a layer on to the opposite scre en. All Key or PI P parameters are cloned — including the shadow , effects, border[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 331 7. Operations Working with Layer Functions rëáåÖ=`çéó== The Copy functi on enables you to copy the properties of t he act ive PIP or Key to another PIP or Key — on the same (or different) mixer .  Use the following steps to PIP or Key parameters to other layers: 1. In the L[...]

332 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions rëáåÖ=cêÉÉòÉ  Use the followin g steps to freeze a layer ’s motion. Both PIPs and Keys can be frozen. 1. In the Layer Control Secti on , select the layer on Previe w that you wish to freeze. 2. In the Layer Function Section , pre [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 333 7. Operations Working with Layer Functions rëáåÖ=bñí=qêáÖÖÉê= The Ext T rigger function is only used wit h the Barco Event s Manager or Barco St age Manager applications. With these two products, when the time line reaches a pro grammed "pause" cue, the timeline p[...]

334 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Layer Funct ions 3. Using the Inpu t Menu , adjust the so urce in t he normal manner . 4. T o restore Preview to its previous setup, double-punch Sour ce Preview . Please note the following important poi nts regarding Source Preview: • While the Source Previ [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 335 7. Operations Working with Layer Functions rëáåÖ=gçáå=jçÇÉ Within a selected mixer , the " Join " mode enables you to lock laye rs A and B tog ether , such that they move as one and maintain a precise relationship. Y ou can also program "moves" when th e t[...]

336 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Move rëáåÖ=jçîÉ The following topics are di scussed in this sectio n: • Programming Move s • Pending and T riggerin g Mov e s • Move Notes mêçÖê~ããáåÖ=jçîÉë The Encore Presentation System enables you to move a PIP or a Key (or both) smoothly [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 337 7. Operations Using Move mêçÖê~ã=~=jçîÉ=çå=mêçÖê~ã This mode enables you to program a move with the select ed layer on both Program and Preview — after the layer has transitioned to Program.  Use the following steps to program a move on Program: 1. In the Layer Cont[...]

338 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Move mÉåÇ=çå=mêçÖê~ã This method enables you to trig ger th e move manual ly , with a layer already on Program.  Use the following steps to pend a move on Program: 1. With the move properly programmed , ensure that the layer containing a move is selected [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 339 7. Operations Using Move • On screen, off screen — When progra mming moves, Encore lets you move a PIP or Key from an off-screen location to an on-screen location, and vice-versa. • Editing moves — Once a move property h as been defined, it can be edi ted: a. Select the layer t[...]

340 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Live Modes tçêâáåÖ=ïáíÜ=iáîÉ=jçÇÉë The following topics are di scussed in this sectio n: • Using Live Switch Pr ogram/ Preview Mode • Using Live Switch Source Mod e • Live Mode Sou rce Timing rëáåÖ=iáîÉ=pïáíÅÜ=mêçÖê~ãLmê[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 341 7. Operations Working with Li ve Modes Please note the following poi nts regarding the Live Switch Progr am/Preview Mode : • When switching directly on Program , the Con troller uses a predefined set of rules. Refe r to the " Live Mode Source Timing " section page 342 for d[...]

342 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Live Modes 5. T o clear the entire mode, press Shift + Source . The button turns off, and the entire Source Selection Bus is returned to its normal functi onal ity . Please note the following poi nts regarding the Live Switch Sou rce Mode : • When switching d[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 343 7. Operations Working with Transiti ons tçêâáåÖ=ïáíÜ=qê~åëáíáçåë This section provides instructio ns for pe rforming a variety of transitions. The following topics are discussed: • Cut • Mix • Wipe • Manual T ran sitions `ìí Cuts can be performed on both si[...]

344 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Transit ions táéÉ All types of wipes can be performed on single screen destinations. On widescreen destinations, you ca n only perform a Wip e Up or a Wi pe Do wn .  Use the following steps to perform a Wi pe : 1. Set up the desired “look” in Previ e [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 345 7. Operations Working with Preset s tçêâáåÖ=ïáíÜ=mêÉëÉíë This section provides detailed instructi ons for working with Presets. On the Controller , the Preset Section en abl es you to store and recall entire setups. Each Preset button represents one “look” of the en[...]

346 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Presets S Example 3 : Mix — No conflict. a. Enable Mix mode. b. S tore a Preset tha t con t ains Source 1 on Layer 1A . c. Ta k e Source 2 to Program on Layer 1A . d. Recall the Pre set. Yo u can reca ll the Preset to Preview , becau se there is always a laye[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 347 7. Operations Working with Preset s oÉÅ~ääáåÖ=mêÉëÉíë  Use the following steps to recall a preset: 1. Check the available resources on Prog ram. If the resource s (layers) that you wish to recall are already in use on Program, they must f irst be cleared before the “r[...]

348 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Presets mêÉëÉíë=~åÇ=jçîÉë Encore’s Preset mode provides a unique " auto matic pend move " feature : • If you store several Presets, for example, with the same PIP in different sizes and positions on screen, the system aut omatically pe[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 349 7. Operations Layer and Aux Control i~óÉê=~åÇ=^ìñ=`çåíêçä AUX — Information to be provided. Note The Layer and Aux Control features are currently not implemented. AUX[...]

350 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with User Keys tçêâáåÖ=ïáíÜ=rëÉê=hÉóë Encore’s User Key feature e nables you to se lect all (or a porti on) of the current layer ’s attributes (such as border colo r , size, effects, etc.), and store them on a User Key . Those attributes can then[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 351 7. Operations Working with Tallies tçêâáåÖ=ïáíÜ=q~ääáÉë The "T ally" function can be ena bled or disabled as requi red.  Use the following steps to enable or disabl e tallies: 1. Ensure that your tallies are properly set up. In Chapter 6, refer t o the "[...]

352 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Enable/Disable Controller Lockou t bå~ÄäÉLaáë~ÄäÉ=`çåíêçääÉê=içÅâçìí This section provides instructio ns for lo cking and unlocking the Controll er . S Prerequisite : ~ Ensure that you are familiar with the Lock out Code Menu and its associated subme[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 353 7. Operations Using Backup and Restore rëáåÖ=_~Åâìé=~åÇ=oÉëíçêÉ The Encore system enables you to backup and restore all (or a port ion) of the complete system configuration setup usi ng a customer supplied flash me mory card. The following topics are discussed: • Syst[...]

354 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Using Backup and Restore póëíÉã=oÉëíçêÉ Please note the following important poi nts regarding the "restore" function: • When restoring, you must have the same version of software installed in the Controller as was used to perform the backup. • Conve[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 355 7. Operations Working with Frame Grabs tçêâáåÖ=ïáíÜ=cê~ãÉ=dê~Äë The following topics are di scussed in this sectio n: • Frame Capture Ove r vi ew • Capturing Fr ames from a Background or DSK Input • Capturing Fr ames from a Layer • Saving Frames in Permane nt Me[...]

356 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs The following table illustrates the valid layers from which to capture DSK frames, depending on the num ber of M/Es in your system. Encore provides complete flexibili ty wit h regard to frame grabs: • T emporary Frame Stores — The Encore Video P[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 357 7. Operations Working with Frame Grabs • Permanent Frame Stores — As standard, the Encore Video Processor has three permanent (non-volatile) f rame stores available. Please note: ~ Frames in permanent storage are not lost when the system is powered down. At bootup, a ll frames from[...]

358 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs ~ Background frames are captured into the "bott om" stack Processor: BG_FG_1 , BG_FG_2 or BG_FG_3 . ~ DSK frames are captured into the "top" stack Processor: DSK_FG_1 , DSK_FG_2 and DSK_FG_3 . 8. Press {CAPTURE} . Once pressed, t[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 359 7. Operations Working with Frame Grabs ~ For wide screen destinations on ly , sele ct All to capture across all Processors, or select the ID of an individual processor . 8. On the Frame Number line, select the tempo rary frame store into which the frame will be captured ( FG_1 , FG_2 o[...]

360 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with Frame Grabs • Press YES to save the f rame. All front panel controls will be locked for up to three minutes. • Press NO to cancel the procedure. ~ In "ES" systems, the Exten ded Frame Save Menu appears. •I n t h e Saved Location field, select a [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 361 7. Operations Working with Frame Grabs bê~ëáåÖ=~åÇ=aÉäÉíáåÖ=cê~ãÉë Please remember the fol lowing rules regarding erasing and del eting frames: • The " delete " procedure enables you to mark a selected frame as delet ed — but the ERASE functi on is still[...]

362 Encore Presentation System • User ’s Guide • Rev 04 7. Operations Working with the DSK tçêâáåÖ=ïáíÜ=íÜÉ=aph  Use the following steps to perform a downstream key: 1. Ensure that the DSK is prope rly set up, and the key " type " is selected on the DSK Input Setup Me nu . In Chapter 6, refer to the " DSK Setup [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 363 ^ K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed techni cal sp ecif ications for the Encore Presentation System. The following topics are discussed: • Input Specifications • Output S p ec if ications • Physical and Electrical Specificati[...]

364 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input Specifications fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists Encore Video Processor input specifications. T able A-1. Encore Video Processor Input S pecifications Input Parameter Specification Mixer/Effect s Channels (2 per M/E board) An[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 365 ^K==péÉÅáÑáÅ~íáçåë Input Specifica ti ons The table below lists Encore VPx input specifications. T able A-2. Encore VPx Input Specifications Input Parameter Specification Via “Source Link” Input Analog Video RGBHV / RGBS / RGsB co mputer video, YPbPr video (SD or HD), S[...]

366 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Output Spec ifications lìíéìí=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation System outp ut specifications. T able A-3. Encore Video Processor Output S pecifications, VP and VPx Output Parameter Specification Preview Output Analo[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 367 ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specifications mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation Syst em physi c al and electrical specifications. T able A-4. Encore Physical and Elec trical S pecificati[...]

368 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Communications Specifications `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists Encore Presentation System communications specifica tions. T able A-5. Encore Communications Specifications Parameter Det ail Specification RS-232 Vid[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 369 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are di scussed in this sectio n: • DVI Connector Pinouts • DVI-I Connecto r Pinout s • Analog 15-pin D Conn ector • Ethernet Connector • Serial Connector • T ally Connector asf=`çååÉÅíçê=má?[...]

370 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê=máåçìíë The figure below illustra tes the DVI-I connector: Figure A-2. DVI-I Connector The table below lists DVI-I Connector pinouts. Please note: • T .M.D.S = T ransition Minimi zed Differential Signal • DDC = Disp[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 371 ^K==péÉÅáÑáÅ~íáçåë Pinouts ^å~äçÖ=NRJéáå=a=`çååÉÅíçê The figure below illustra tes the analog 15-pin D connector: Figure A-3. Analog 15-pin D Connector The table below lists Analog 15-pin D connector pinouts. Note that each M/E’s Analog Inpu t connectors ( [...]

372 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-4. Ethernet Connector The table below lists Ethernet connector pinouts. T able A-10. Ethernet Connector Pinouts Pin Signal Wire Color 1 TX Da ta + White[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 373 ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=`çååÉÅíçê The figure below illustra tes the Video Processor ’s Serial connector , and the Ext Comm and Console connectors on both Controller mo dels. All connectors are identical. Figure A-5. Serial Connector The table below l[...]

374 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Pinouts q~ääó=`çååÉÅíçê Each Encore Controller provides one 25-pin D connecto r for issuing tally “relay closure” commands to external devices. Eight tally circuits are provided. Please note: • T ally outputs provide dry-contact relay closu[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 375 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons fåéìí=~åÇ=lìíéìí=oÉëçäìíáçåë The tables on the following pages provide comprehensive li sts of available input and output resolutions. Please note: • In Chapter 5, refer t o the “ Input Menu Descripti[...]

376 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 920x1200 @60 1024x768 @47.95 1024x768 @48 1024x768 @50 1024x768 @59.94 1024x768 @60 1024x768 @70 1024x768 @71.93 1024x768 @72 1024x768 @75 1024x768 @85 1 152x864 @75 1280x1024 @47.95 1280x1024 @48 1280x1024 @50 1280x1024 @59.9[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 377 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons 1280x800 @60 1280x800 @60 1280x800 II @60 1280x800 II @60 1280x960 @50 1280x960 @59.94 1280x960 @60 1280x960 @85 1360x768 @60 1360x768 @60 1364x1024 @47.95 1364x1024 @48 1364x1024 @50 1364x1024 @59.94 1364x1024 @75 1364x768 @[...]

378 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1536x768 @59.94 1600x1200 @47.95 1600x1200 @48 1600x1200 @50 1600x1200 @59.94 1600x1200 @60 1680x1050 @60 1680x1050 @60 1680x1050 @60 1920x1080i @50 1920x1080i @59.94 1920x1080i @60 1920x1080p @23.98 1920x1080p @24 1920x1080p [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 379 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons lìíéìí=oÉëçäìíáçåë Output resolut ions are liste d below . Each entry lists Format @Fv (Hz) . 2048x1080p @59.94 2048x1080p @60 2048x1080p II @50 2048x1200 @59.94 2048x1200 @59.94 2048x512p @59.94 Apple 1200p @6[...]

380 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1280x1024 @48 1280x1024 @50 1280x1024 @59.94 1280x1024 @60 1280x1024 @71.93 1280x1024 @72 1280x1024 @75 1280x720 @60 1280x720 II @60 1280x720p @48 1280x720p @50 1280x720p @59.94 1280x720p @60 1280x768 @47.95 1280x768 @48 1280x[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 381 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resoluti ons 1400x1050 @48 1400x1050 @50 1400x1050 @59.94 1400x1050 @60 1400x1050 @75 1440x900 @60 1440x900 @75 1440x900 @85 1536x768 @50 1536x768 @59.94 1600x1200 @47.95 1600x1200 @48 1600x1200 @50 1600x1200 @59.94 1600x1200 @60 1680x105[...]

382 Encore Presentation System • User ’s Guide • Rev 04 ^K==péÉÅáÑáÅ~íáçåë Input and Output Resolu ti ons 1920x1200 @59.94 1920x1200 @60 2048x1080p @48 2048x1080p @50 2048x1080p @59.94 2048x1080p @60 2048x1080p II @50 2048x1200 @59.94 2048x512p @59.94 NTSC (480i) PA L ( 5 7 6 i ) T able A-14. Output Resolutions (Contin ued)[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 383 _K==` çåí ~Å í=fåÑ çê ã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Wa r r a n t y • Return Material Au thorization (RMA) • Contact Information t~êê~åíó All video products are designed and tested to the highest quali[...]

384 Encore Presentation System • User ’s Guide • Rev 04 _K==`çåí~Åí=fåÑçêã~íáçå Contact Informat io n `çåí~Åí=fåÑçêã~íáçå Barco, Inc. 1 1 101 T rade Center Drive Rancho C ordova, Cal ifornia 9 5670 USA • Phone: (91 6) 859-2500 • Fax: (916) 859-2515 • Website: www .barco.com Sales Contact • Direct: (916) 859[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 385 `K==réÖê ~ÇáåÖ=pçÑí ï ~ê É få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • Software Upgrade Overview • Hardware Requirements • Sof tware Requirement s • Downloadin g Software • Serial Upgrade Method • Ethernet Upgrade Method[...]

386 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Software Upgrade Overview pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the Encore Presen tation System are loaded into the hardware at power- up. These file s are stored in t he unit’s onboard flash memory , wh ich can be upgrade d [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 387 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Downloading Software açïåäç~ÇáåÖ=pçÑíï~êÉ T wo dif ferent methods can be us ed to download Encore system software and the Flash File Loader utility: • Via FTP Site • Via We b S i te sá~=cqm=páíÉ Barco Folsom's FTP site add[...]

388 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Metho d 6. When the Fi le Downloa d Dialog ap pears, click Sa ve to save the file to your computer . 7. When the Save As Dialog appears, navigate t o the target folder and click Save . 8. With the downlo ad complete, navigate to the targ[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 389 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Serial Upgrade Method 7. T o verify communications betwe en the PC and the Controller: a. In the Flash Loader , click in the b lack terminal win dow area. b. Note the cond iti on of the status lights: • DCD and CTS should be red. • TXD and RXD sh[...]

390 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method bíÜÉêåÉí=réÖê~ÇÉ=jÉíÜçÇ  Use the following steps to upgrade Encore software using an Etherne t conn ection to your PC: 1. Ensure that your PC (or laptop) uses the Windows ® 2000 or XP op erat ing systems. 2.[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 391 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrad e Method you cannot connect, refer to the “ T rou bleshooting Eth ernet Communic ation ” section on page 391. 10. T o upl oad files to the Controller , click " Open script file to read and upload ." 11 . In the dialog, s[...]

392 Encore Presentation System • User ’s Guide • Rev 04 `K==réÖê~ÇáåÖ=pçÑíï~êÉ Ethernet Upgrade Method e. On the command promp t li n e , ty pe : ping 192.168.0.1 ... followed by Enter . f. If the computer is able to successfu lly communicate with the Controller , you will see a seri es of “ replies ” f rom the target IP a dd[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 393 aK==tçê âáåÖ=t áíÜ=aÉ ë íáå~íáçåë få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appendix: • ScreenPRO-II Con figurations • PresentationPRO-II Aux Configuration • ImagePRO Aux Config uration pÅêÉÉåmolJff=`çåÑáÖìê~íáçåë [...]

394 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Configurations fåíÉêå~ä=oçìíÉê=`çåÑáÖìê~íáçå The diagram below illustrates an Encore config uration that uses two ScreenPRO-II units with internal source ro uting. Each Scre enPRO-II is set up as a unique[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 395 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Co n fig ur ations bñíÉêå~ä=pÉêá~ä=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing. Each ScreenPRO-II is set up as a uniq[...]

396 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Configurations bñíÉêå~ä=bíÜÉêåÉí=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing. Each ScreenPRO-II is set up as a uniqu[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 397 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ScreenPRO-II Co n fig ur ations bñíÉêå~ä=pÉêá~ä=~åÇ=bíÜÉêåÉí=oçìíÉê=`çåÑáÖìê~íáçå The diagram below shows a configuratio n that uses two ScreenPRO-II uni ts with external source routing. Each ScreenPRO-[...]

398 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë PresentationPRO-II Aux Configuration mêÉëÉåí~íáçåmolJff=^ìñ=`çåÑáÖìê~íáçå PresentationPRO-II units can be connected to the Encore Contro ller via Ethernet for use as Aux destinations. In this manner, AUX outputs from[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 399 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ImagePRO Aux Configurati on fã~ÖÉmol=^ìñ=`çåÑáÖìê~íáçå ImagePRO units can be connected to the Encore Controller via Ethernet f or use as Aux destinations. In this manner, AUX output s from up to three rout ers are connect[...]

400 Encore Presentation System • User ’s Guide • Rev 04 aK==tçêâáåÖ=táíÜ=aÉëíáå~íáçåë ImagePRO Aux Confi guration[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 401 bK==^ ééäáÅ~íáçå=kçí É ë få=qÜáë=^ééÉåÇáñ The following applica tion notes are provided in this Appendix: • Encore Contro ller to Router Connectio ns • Router Interface No tes[...]

402 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons båÅçêÉ=`çåíêçääÉê=íç=oçìíÉê=`çååÉÅíáçåë This application note provides information on how to use RS-232 communications to connect the Encore Controller (bot h the SC and LC models) [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 403 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons buq=`ljj=máåçìíë The table below illustrates the pin outs on Encore's EXT COMM serial conne ctor . Figure E-1. Ext Comm Connector Note Data "direction" informa tion is provided from the p [...]

404 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons `~ÄäÉ=`çååÉÅíáçå=Ô=píê~áÖÜí=qÜêçìÖÜ The table below illustrates the required pi n connections for typical Encore-to-Ro uter configurations. A straight-t hroug h RS-232 cable is used betwe[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 405 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons `~ÄäÉ=`çååÉÅíáçå=Ô=kìää=jçÇÉã The table below illustrates the requ ired pi n connections for alternate Encore-to-Router configurations (such as to Extron router s). A null modem RS-232 cabl[...]

406 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons i~åíêçåáñ=bíÜÉêåÉí=íç=pÉêá~ä=`~ÄäÉ=`çååÉÅíáçå Because Encore Controllers only have on e RS -232 serial port (EXT COMM), an external device (such as the Lantronix UDS20 0 or UDS2100[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 407 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Conn ecti ons oçìíÉê=`çååÉÅíáçå=q~ÄäÉ The table below illustrates nu me rous notes and cable requ irements, when conn ecti ng Encore to vari ous routers. Note RS-232 cable requirements vary . Use the table [...]

408 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Encore Controller to Router Connecti ons . . ISIS 3 … when connecting to En core Controller 3 … when connecting to Lantronix If required, try reversing null modem cable vs. straight through cable, if the connection does not function properly . NVisi[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 409 bK==^ééäáÅ~íáçå=kçíÉë Router Interface Notes oçìíÉê=fåíÉêÑ~ÅÉ=kçíÉë For selected third party routers, additiona l int erface information is provided below. The following topics are discussed in t his sect ion: • Extron Router Support • DVILink and DPI R[...]

410 Encore Presentation System • User ’s Guide • Rev 04 bK==^ééäáÅ~íáçå=kçíÉë Router Interf ace Notes Password to be en tered. The Controller does th is aut omatically when attempti ng to connect to the rout er by usi ng the default factory account . T o ensure that a connection is su ccessfu l, verify that the Leitch Router has [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 41 1 fåÇÉ ñ pçÑíâ Éóë {ADD NEW} . . . . . . . . . . . . . . . . . . . . . . . . . . 191 {ADD P A TCH} . . . . . . . . . . . . . . . . . . . . 189, 194 {ADD} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 {ALL OFF} . . . . . . . . . . . . . . . . . . . . . . . [...]

412 Encore Presentation System • User ’s Guide • Rev 04 Index {TEST COMM} . . . . . . . . . . . . . . . . . . . . . . . . 192 {TEST LINKS} . . . . . . . . . . . . . . . . . . . . . . . . 178 {TEST P A TTERN} . . . . . . . . . 160, 161, 16 6, 169 {TRACK SIZ E} . . . . . . . . . . . . . . . . . . . . . . . . 219 {TRACK} . . . . . . . . . . . . [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 413 Index Barco backup and restore utility . . . . . . . . . . . . . 33 conta ct informat ion . . . . . . . . . . . . . . . . . 383 Events Manager . . . . . . . . . . . . . . . . 22, 143 Folsom W arranty . . . . . . . . . . . . . . . . . . 383 sales cont act information . . . . . . . . . .[...]

414 Encore Presentation System • User ’s Guide • Rev 04 Index DVI-I connectors . . . . . . . . . . . . . . . . . . . . 56 HD/SDI input s . . . . . . . . . . . . . . . . . . . . . . 56 left just ified . . . . . . . . . . . . . . . . . . . . . . . 102 multiple proce ssors . . . . . . . . . . . . . . . . . 56 operation . . . . . . . . . . . . . [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 415 Index touch screen section . . . . . . . . . . . . . . . 108 transition fun ction section . . . . . . . . . . . . 1 10 transition sectio n . . . . . . . . . . . . . . . . . . 1 10 user key s ection . . . . . . . . . . . . . . . 1 10, 144 Controller SC . . . . . . . . . . . . . . . . . [...]

416 Encore Presentation System • User ’s Guide • Rev 04 Index ScreenPRO-II . . . . . . . . . . . . . . . . . . . . . . 27 ScreenPRO-II configurations . . . . . . . . . 393 ScreenPRO-II, external rout er 395 , 39 6, 397 ScreenPRO-II, internal router . . . . . . . . . 394 setup . . . . . . . . . . . . . . . . . . . . . . . . 182, 277 setup Aux [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 417 Index triple mixer . . . . . . . . . . . . . . . . . . . . . . . . 31 Electrical spec ifications . . . . . . . . . . . . . . . . . 367 EMPT Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 Encore configurator . . . . . . . . . . . . . . . . . . . . . . . 33 control unit [...]

418 Encore Presentation System • User ’s Guide • Rev 04 Index output s . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 setup outp ut . . . . . . . . . . . . . . . . . . . . . . 285 Frame gr ab . . . . . . . . . . . . . . . . . . . . . . . . 23, 38 background . . . . . . . . . . . . . . . . . . . 239, 244 button . . . . . . . . . . . [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 419 Index back up system to flash memory . . 300, 353 calibrate touch scre en . . . . . . . . . . 267, 30 5 capture frame from a layer . . . . . . . . . . . 358 capture frame from background input . . 357 change layer mode . . . . . . . . . . . . . . . . . 329 clear a gro up . . . . . . . [...]

420 Encore Presentation System • User ’s Guide • Rev 04 Index Hue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Hyperlinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 f ID all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 color balanc e menu . . . . . . . . . . . . . . . . 157 mapping, vi[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 421 Index functions, c ut + fill . . . . . . . . . . . . . . . . . . 227 functions, lu ma . . . . . . . . . . . . . . . . . . . . 226 joystick function s . . . . . . . . . . . . . . . . . . 230 menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 menu description . . . . . . . . [...]

422 Encore Presentation System • User ’s Guide • Rev 04 Index DVI input A co nnector . . . . . . . . . . . . . . . 52 DVI input A co nnector (VPx) . . . . . . . . . . 54 DVI input B co nnector . . . . . . . . . . . . . . . 53 DVI input B co nnector (VPx) . . . . . . . . . . 55 HD/SDI input A conn ector . . . . . . . . . . . . 52 HD/SDI input [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 423 Index RS-232 setup . . . . . . . . . . . . . . . . . . . . . 192 settings . . . . . . . . . . . . . . . . . . . . . . . . . . 165 shadow . . . . . . . . . . . . . . . . . . . . . . . . . . 219 sizing menu . . . . . . . . . . . . . . . . . . . . . . 155 software version . . . . . . . . [...]

424 Encore Presentation System • User ’s Guide • Rev 04 Index Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Number of input s . . . . . . . . . . . . . . . . . . . . . . . . . 191 of outpu ts . . . . . . . . . . . . . . . . . . . . . . . . 191 router . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Numeric [...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 425 Index m Page but ton . . . . . . . . . . . . . . . . . . . . . . 124, 1 44 Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 Patch input s . . . . . . . . . . . . . . . . . . . . . . . 275, 276 next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 [...]

426 Encore Presentation System • User ’s Guide • Rev 04 Index HD/SDI input A conn ector . . . . . . . . . . . . 52 HD/SDI input B conn ector . . . . . . . . . . . . 53 M/E connectors . . . . . . . . . . . . . . . . . 47, 52 preview out analog connecto r . . . . . . . . . 46 preview out DVI connector . . . . . . . . . . . . 46 program 1 out an[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 427 Index Return material authorization . . . . . . . . . . . . . 383 RGB sources . . . . . . . . . . . . . . . . . . . . . . . . . 157 RMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 383 Rotary encoder m enu descript ion . . . . . . . . . . . 179 knobs . . . . . . . . [...]

428 Encore Presentation System • User ’s Guide • Rev 04 Index software upgrade met hod . . . . . . . . . . . . 388 Set user preferences . . . . . . . . . . . . . . . . . . . 308 Settings m enu descriptio n . . . . . . . . . . . . . . . 165 Setup Aux destinati on . . . . . . . . . . . . . . . . 281, 282 Aux destinati on, overview . . . . . . .[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 429 Index S plit button . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 mode . . . . . . . . . . . . . . . . . . . . . . . 130, 321 mode, understanding . . . . . . . . . . . . . . . 32 1 St a c k configuration . . . . . . . . . . . . . . . . . . . . . . . 80 destination setup . .[...]

430 Encore Presentation System • User ’s Guide • Rev 04 Index T rademar ks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 T ransition backgrounds . . . . . . . . . . . . . . . . . . . . . . 320 cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 edge wid th . . . . . . . . . . . . . . . . . . . . . . . 209 functions[...]

Encore Prese ntati on System • User’s Gu ide • Rev 04 431 Index processing, image overlap . . . . . . . . . . . 100 processing , projector setup . . . . . . . . . . 101 processor . . . . . . . . . . . . . . . . . . . . . . . . . 24 processor (VP) input specifications . . . . 36 4 processor (VPx) input specifications . . . 365 processor h ardw[...]

432 Encore Presentation System • User ’s Guide • Rev 04 Index[...]